782095

Scheppach Kity DRA 260 Manual

19
Zoom out
Zoom in
Previous page
1/36
Next page
19
m Remaining hazards
The machine has been built using modern technology in
accordance with recognized safety rules. Some remain-
ing hazards, however, may still exist.
• The rotating planing spindle can cause injuries to
ngers and hands if the work piece is incorrectly fed.
• Thrown work pieces can lead to injury if the work
piece is not properly secured or fed, such as
working without a limit stop.
• Wood chips and sawdust can be health hazards. Be
sure to wear personal protective gear such as safety
goggles and a dust mask. Use a vacuum exhaust
system.
• Injuries through defective planer/thicknesser
blades. Check the blades regularly for their perfect
condition.
• Risk of injuries to nger and hands when changing
the planer/thicknesser blades. Wear suitable gloves.
• Risk of injuries through the starting planer/
thicknesser blades when switching on the machine.
• Injuries caused by electricity through the use of
damaged extension cables.
• Health hazards through the running tool with long
hair and loose clothes. Wear personal protective
gear like a hairnet and close-tting clothes.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still exist.
• Process chosen wood only, without imperfections
such as: Knots, transverse cracks, surface cracks,
foreign objects (nails, screws, metal parts). Flawed
wood creates a risk during work.
• Remaining hazards can be minimized by following
the instructions in "Safety Precautions", “Proper
Use", and in the entire operating instructions.
• Drawing-in/trapping hazard by power feed
mechanism.
• Squeezing hazard by work piece power-outfeed.
Setting up
Prepare the location of the machine. Make sure there is
sufcient space to allow safe and trouble-free working.
The machine has been designed to operate in enclosed
rooms. It must be set up in a stable way on a level, rm
ground.
The machine can be fastened to a work bench (xing
material not included in the supply extent (Fig. 1).
Transport
For transport, the machine may only be lifted on the
base. Never lift it on the guards, the setting handles or
the planer/thicknesser table.
m Risques résiduels
Cette machine est à la pointe de la technique et répond
aux règles de sécurité actuellement en vigueur. Néan-
moins, certains risques résiduels peuvent subsister
pendant son fonctionnement.
• Risque de blessure aux doigts et aux mains au
contact de l'arbre de rabot du fait d’un mauvais
guidage de la pièce à usiner.
• Blessures au contact de la pièce à usiner projetée
en raison d’un mauvais serrage ou d’un mauvais
guidage – par exemple lors du travail sans guide.
• Risque pour la santé provenant de la sciure ou
des copeaux. Il faut impérativement porter des
équipements de protection personnels tels des
lunettes de protection et un masque respiratoire et
utiliser un dispositif d’aspiration.
• Blessures par des fers de rabot défectueux.
Inspecter régulièrement les fers.
• Risque de blessure aux doigts et aux mains lors du
changement de fers. Porter des gants.
• Risque de blessure par les fers lors de la mise en
marche de la machine.
• Risque dû à l’électricité lors de l’utilisation de câbles
de raccordement électriques non conformes.
• Risque de blessures en présence de cheveux longs
et de vêtements amples. Porter des vêtements bien
ajustés et un let.
• De plus, des risques résiduels imprévisibles peuvent
survenir malgré toutes les précautions prises.
• N’utilisez que des morceaux de bois choisis et
sans défauts tels que les nœuds, les ssures
transversales, les défauts de surface, les corps
étrangers (clous, vis), les bois en mauvais état
peuvent engendrer des risques lors de l’usinage.
• Les risques résiduels peuvent être réduits si les
«règles de sécurité» et «l’utilisation conforme aux
prescriptions» ainsi que le mode d’emploi sont
respectés.
Installation
Préparer le poste de travail pour la machine. Dispo-
ser de sufsamment de place pour permettre un tra-
vail sans danger et sans problème. La machine a été
construite pour être utilisée dans des locaux fermés et
doit reposer sur un support stable.
La machine peut être montée sur un établi (éléments
de xation non fournis) (Fig. 1).
Transport
Toujours transporter et soulever la machine par son
bâti, ne jamais la soulever par les dispositifs de pro-
tection, par les poignées de réglage et par la table de
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Kity DRA 260 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Kity DRA 260 in the language / languages: English, German, French as an attachment in your email.

The manual is 2.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info