Manual Scheppach HTH250 (page 22 of 104) (English, German, Dutch, Danish, French, Italian, Polish, Swedish)

782035

Zoom out

Zoom in

1/104

22 GB

• Never leave the hedge trimmer unattended.

• For breaks the hedge trimmer has to be put down in

such a manner that no person will be endangered. As-

sure the hedge trimmer against unauthorised access.

• Persons under the age of 18 must not operate the de-

vice.

• Keep other persons away.

• The operator is responsible for accidents or risks

which occur to other persons or their properties.

• The operator is resposnible to third persons within the

area of operations.

• Keep children away.

• Do not allow other persons, especially children, to

touch the tool or motor. Keep them away from your

working area.

• Do not use a blunt, broken or otherwise damaged cut-

ting device.

• Be sure that the cutting device already moves before

you start cutting.

• Do not overload the machine! You work better and

safer in the given performance range.

• Only operate the machine with complete and correctly

attached safety equipment and do not alter anything

on the machine that could impair the safety.

• Do not modify the device or parts of the device re-

spectively.

• Do not use any knives which do not comply with the

indicated characteristics of this instruction manual.

The use of other tools and other accessories can signify

a risk of injury for you.

• Stop the machine and remove the spark plug connec-

tor from the spark plug when

- the hedge trimmer had contact with soil, stones,

nails or other foreign substances

• checking the device for damages

- carrying out repair works

- maintenance and cleaning

- carrying out servicing and repair works, removal of

faults (including blocking of knives)

- transport and storage

- leaving the hedge trimmer (also for short-term inter-

ruptions)

• Maintain your hedge trimmer with care:

- Keep your tools sharp and clean in order to be able

to work better and safer.

- Keep handles dry and free of oil and grease.

- Follow the maintenance instructions.

• Check the machine for possible damage:

- Before continuing to use the machine, the protec-

tive devices must be inspected to ensure that they

work perfectly and with their intended function.

- Check whether the movable parts function perfectly

and do not stick or whether the parts are damaged.

All parts must be correctly installed and full all

conditions to ensure perfect operation of the hedge

trimmer.

- Damaged guards and parts must be properly re-

paired or exchanged by a recognized, specialist

workshop; insofar as nothing else is stated in the

instructions for use.

- Damaged or illegible safety labels should be re-

placed immediately.

• Do not allow any tool key to be plugged in! Before

switching on, check always that wrenches and adjust-

ing tools are removed. Before switching on, check al-

ways that wrenches and adjusting tools are removed.

• Store unused equipment in a dry, locked place out of

the reach of children.

• Do not repair the device unless you are qualied for

such kind of work. Do not carry out repair operations

on the machine other than those described in section

“Maintenance” but contact the manufacturer or au-

thorized customer service centres.

Repairs to other parts of the machine must be carried

out by the manufacturer or one of his customer service

points.

Use only original spare parts. Accidents can arise for

the user through the use of other spare parts. The man-

ufacturer is not liable for any damage or injury resulting

from such action.

Safe handling with fuels

Fuels and fuel vapours are inammable and may cause

serious injury on the skin or when inhaled. Therefore be

careful and provide sufcient ventilation when handling

with fuels.

• Stop the engine and allow the device to cool down

before fuelling it.

• Do not smoke and avoid open ames when fuelling.

• Wear gloves when fuelling.

• Do not fuel in closed rooms.

• Avoid spilling of fuel or oil. Clean the hedge trimmer

immediately when you have spilled fuel or oil. Change

your clothes immediately when you have spilled fuel

or oil on them.

• Make sure that no fuel can come into the soil.

• Carefully close the tank cap after fuelling and check

that it does not get loose during operation.

• Check that there is no leakage on the tank cap and

fuel lines. If there are leaks this device may not be

started.

• Only transport and store fuels in containers approved

and identied for this.

• Keep children away from fuels.

• Do not handle and store fuels close to combustible

and highly inammable materials as well as sparks

and open ames.

• Go away at least three metres from the fuelling place

to start the device.

• To reduce the re risk keep the motor and silencer

free from cutting remainders, leaves and lubricants.

Risidual risks

Even if used properly, residual risks can exist even if the

relevant safety regulations are complied with due to the

design determined by the intended purpose.

Residual risks can be minimised if the “Safety informa-

tion” and the “Intended usage” as well as the whole of

the operating instructions are observed.

Observing these instructions, and taking proper care,

will reduce the risk of personal injury or damage to the

equipment.

• Injury by catapulted parts.

• Breaking or catapulting of knife pieces.

• Carbon monoxide poisioning when using the device

in closed or poorly ventilated rooms.

• Burning when touching hot parts.

• Impairment of hearing when working on the machine

for longer periods of time without ear protection.

In addition, in spite of all the precautionary meas-

ures taken, non-obvious residual risks can still ex-

ist.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HTH250 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 4.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HTH250 Manual

Product: