Manual Scheppach HTH250 (page 20 of 104) (English, German, Dutch, Danish, French, Italian, Polish, Swedish)

782035

Zoom out

Zoom in

1/104

20 GB

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advantage

of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating in-

structions, you have to meet the applicable regulations

that apply for the operation of the machine in your coun-

try.

Keep the operating instructions package with the ma-

chine at all times and store it in a plastic cover to protect

it from dirt and moisture. Read the instruction manual

each time before operating the machine and carefully

follow its information. The machine can only be oper-

ated by persons who were instructed concerning the

operation of the machine and who are informed about

the associated dangers. The minimum age requirement

must be complied with.

2. Device description (Fig. 1)

1. Cutting device

2. Hand guard

3. Front handhold

4. Choke

5. Cranking rope with handle

6. ON / OFF-switch

7. Throttle lock-out switch

8. Air lter cover

9. Wing screw

10. Zerk tting (grease tting)

11. Fuel pump

12. Fuel tank cap

13. Slider

14. Throttle trigger

15. Rear handle

16. Spark plug connector

3. Scope of delivery

Open the packaging and remove the device carefully.

Remove the packaging material as well as the packag-

ing and transport bracing (if available). Check that the

delivery is complete. Check the device and accessory

parts for transport damage. If possible, store the pack-

aging until the warranty period has expired.

• Read the operating instructions to make yourself fa-

miliar with the device prior to using it.

• Only use original parts for accessories as well as for

wearing and spare parts. Spare parts are available

from your specialized dealer.

• Specify our part numbers as well as the type and year

of construction of the device in your orders.

m ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plastic bags,

lm and small parts! There is a risk of swallowing and

suffocation!

Petrol Hedge trimmer

Knives protection

Spark plug socket spanner

Mixing bottle

Assembly material

Manual

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HTH250 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 4.41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HTH250 Manual

Product: