Manual Scheppach HS80 (page 15 of 103) (English, German, Danish, French, Italian, Swedish, Finnish)

644558

Zoom out

Zoom in

1/103

General information

• After unpacking, check all parts for possible

transportation damages. In the event of

complaints, inform the supplier immediately.

Any complaints made after this time will not

be accepted.

• The shipment is to be checked for complete-

ness upon receipt.

• Read through the manual carefully in order

to make yourself familiar in dealing with the

device before using it for the rst time.

• Only use original equipment regarding ac-

cessories, as well as consumable items and

spare parts. Spare parts can be obtained

from your specialized dealer.

When ordering, please specify our part num-

bers, as well as type and construction year of

the device.

NOTE:

According to the applicable product liability

laws, the manufacturer of the device does not

assume liability for damages to the product or

damages caused by the product that occurs

due to:

• Improper handling,

• Non-compliance of the operating instruc-

tions,

• Repairs by third parties, not by authorized

service technicians,

• Installation and replacement of non-original

spare parts,

• Application other than specied,

• A breakdown of the electrical system that

occurs due to the non-compliance of the

electric regulations and VDE regulations

0100, DIN 57113 / VDE0113.

We recommend:

Read through the complete text in the

operating instructions before installing and

commissioning the device. The operating

instructions are intended to help the user to

become familiar with the machine and take

advantage of its application possibilities in

accordance with the recommendations. The

operating instructions contain important infor-

mation on how to operate the machine safely,

professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and

how to increase reliability and service life of

the machine.

In addition to the safety regulations in the

operating instructions, you have to meet the

applicable regulations that apply for the ope-

ration of the machine in your country.

Keep the operating instructions package

with the machine at all times and store it in a

plastic cover to protect it from dirt and mois-

ture. Read the instruction manual each time

before operating the machine and carefully

follow its information. The machine can only

be operated by persons who were instructed

concerning the operation of the machine

and who are informed about the associated

dangers. The minimum age requirement must

be complied with.

We have marked the points in this manual

that concern your safety with this sign m

General safety information m

ATTENTION! When operating power tools,

the following general safety measures have

to be taken in order to protect the user

against electric shock, risk of injury and

re risk. Read through all of this informa-

tion before operating this power tool and

keep the safety information

Safe working

• Disorder in the working area increases the

risk of accidents.

• Do not expose power tools to rain.

• Do not use power tools in a humid or wet

environment.

• Ensure excellent illumination of the working

area.

• Do not operate power tools where there is a

possible danger of re or explosion.

• Avoid physical contact with grounded ob-

jects. (e.g. tubes, radiators, electric stoves,

cooling appliances).

• Do not let other persons, especially children,

touch the power tool or the cable. Keep

them away from your working area.

• Unused power tools should be kept in a dry,

locked place, high and out of the reach of

children.

• You will work better and safer within the

indicated power range.

• Do not use inefcient power tools for heavy

work.

• Do not use the power tool for any purpose

other than that for which it is intended.

• E.g. do not use a portable circular saw to

cut tree branches or logs.

• Do not wear loose clothes or jewelry; they

could be caught by moving parts.

• When working outdoors, it is recommended

to wear non-slip shoes.

• If you have long hair, wear a hair net.

• Wear safety glasses.

• Wear a breathing mask for dust-generating

works.

• In the case that connections for dust suction

and reception are available please ensure

that they are connected and can be used

properly.

• Do not use the cable to remove the plug

from the socket. Protect the cable from heat,

oil and sharp edges.

• Use clamping devices or a vice to x the

work piece. Thus it will be held more secu-

rely than in your hand.

• Ensure that you have a stable standing

position and keep your balance at all times.

• Keep the cutting tool sharp and clean, in

order to make it work better and safer.

• Follow the instructions regarding lubrication

and tool change.

• Check the power tool‘s connection line regu-

larly and in case of damage have it replaced

by an acknowledged expert..

• Check the extension cables regularly and

replace them when they are damaged.

• Keep the handles dry, clean and free from

oil and fat.

• Be sure that the device is not in use , before

maintenance and while changing tools like

saw blades, drills or any kind of machine

tools.

• Before turning the machine on, make sure

that all keys and adjustment tools have

been removed.

• Make sure that the switch is turned off when

plugging the plug in the socket.

• For outdoor work, use only extension cables

which are approved for this purpose.

• Always pay attention and take the utmost

care when working with an electric power

tool. Do not use the power tool when you

are not concentrated.

• Before further using the power tool, pro-

tective devices and other parts have to be

checked carefully in order to make sure that

they function perfectly and properly.

• Check to see if all movable parts function

properly and that they do not jam and make

sure that no parts are damaged. All parts

have to be mounted properly and have to

comply with all conditions in order to ensure

perfect operation of the power tool.

• Damaged protective devices and parts have

to be repaired or replaced as intended by

an acknowledged specialized workshop,

if not specied otherwise in the operating

instructions.

• Damaged switches have to be replaced in a

customer service repair shop.

• Do not use power tools where the switch

cannot easily be turned on and off.

• Using other application tools and accesso-

ries can cause a risk of personal injury.

• This electrical power tool complies with the

relevant safety regulations.

• Repairs may only be carried out by an ex-

pert who uses original spare parts; otherwi-

se the operator runs the risk of accidents.

■ ADDITIONAL SAFETY INFORMATION

1. Safety precautions

Warning! Do not use damaged or deformed

saw blades.

Replace worn out stage plates.

Use only saw blades which are recommended

by the manufacturer and which correspond

to EN 847-1. Warning! When replacing the

saw blade, ensure that the cutting width is not

narrower and that the main blade width is not

wider than the width of the splitting wedge.

Make sure, that you select a saw blade that is

appropriate for the material you intend to cut.

Wear appropriate, personal protective equip-

ment such as:

- Ear protection to reduce the risk of getting

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS80 in the language / languages: English, German, Danish, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 8,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scheppach HS80

Scheppach HS80 User Manual - All languages - 288 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HS80 Manual

Product: