782563
36
Zoom out
Zoom in
Previous page
1/72
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
36 | GB
Implement measures to protect against noise nui-
sance.
In doing so, take into account the complete working
process, including the times when the power tool is
working without load or switched o󰀨.
Suitable measures include regular maintenance and
care of the power tool and the insertion tools, regu-
lar breaks as well as proper planning of the working
process.
It is necessary to dene safety measures to protect
the operator which are based on an estimate of vibra-
tion exposure during the actual operating conditions
(for this, all parts of the operating cycle have to be
considered, e.g. times during which the power tool is
switched o󰀨 and times during which it is switched on
but runs in no-load mode).
8. Unpacking
m DANGER
Danger of choking or su󰀨ocating
The packaging material, packaging and transport
safety devices are not children’s toys. Plastic bags,
foils and small parts can be swallowed and lead to
choking.
- Keep packaging material, packaging and trans-
port safety devices away from children.
Open the packaging and carefully remove the prod-
uct.
Remove the packaging material, packaging and
transport safety devices (if applicable).
Check the completeness of the scope of delivery. The
customer service must be notied immediately of any
complaints. Later claims will not be recognised.
Check the scope of delivery for transport damage.
The transport company must be notied immedi-
ately of any complaints. Later claims will not be
recognised.
Keep the packaging until the end of the warranty
period.
Read through the operating manual completely.
Only use original spare parts or accessories. Orig-
inal spare parts or accessories can be obtained
from your dealer.
Check that the data on the type plate matches with
the mains power data.
9. Assembly
m WARNING: Remove the mains plug before main-
taining, modifying or assembling the circular table saw.
m Attention!
Always make sure the device is fully assembled
before commissioning!
7. Technical data
AC motor 220 - 240 V~
Power consumption 2000 W
Operating mode S1
Idle speed 4500 min1
Carbide saw blade 255 x 30 x 2,8 mm
Thickness of saw blade
disc 1,8 mm
Number of teeth (pre-
mounted saw blade) 24
Riving knife thickness 1,8 mm
Min. size of workpiece
W x L x H 10 x 50 x 1 mm
Min. table size 742 x 640 mm
Max. table size 1195 x 640 mm
Cutting height max. 45° 58 mm
Cutting height max. 0° 83 mm
Tilting saw blade 0 - 45°
Extraction connection Ø 35 mm
Weight approx. 29 kg
Technical changes reserved!
*S1:Continuous operation with constant load
Noise
The noise values have been determined in accord-
ance with EN 62841.
Sound pressure level LpA .............................. 94 dB(A)
Uncertainty KpA .................................................... 3 dB
Sound power level LWA .................................107 dB(A)
Uncertainty KWA ................................................... 3 dB
m WARNING
Excessive and frequent exposure to noise can lead to
hearing damage or hearing loss.
- Wear hearing protection.
- Take breaks.
Total vibration values (vector sum of three directions)
determined according to EN 62841.
NOTE: The specied noise emission values have
been measured in accordance with a standardised
test procedure and can be used to compare one power
tool with another.
The specied noise emission values can also be
used for an initial estimation of the exposure.
WARNING: The noise emission values can vary
from the specied values during the actual use
of the power tool, depending on the type and the
manner in which the power tool is used, and in
particular the type of workpiece being processed.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HS116 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS116 in the language / languages: English, German, French as an attachment in your email.

The manual is 6.03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info