Manual Scheppach HRS800 (page 22 of 108) (English, German, French, Italian)

781640

Zoom out

Zoom in

1/108

22 GB

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect work-

ing order.

• Service and clean the appliance regularly

• Adapt your working style to suit the appliance

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

8. Installation

Fitting the cable hoist to the attachment

m DANGER!

Risk of injury and death!

Insufcient attachment of the cable hoist to a beam,

pipe, etc. can cause the cable hoist and load to fall,

causing serious injury and death.

• Make sure that the attachment to which you are at-

taching the cable hoist, e.g. beam, pipe, etc., can

withstand the load to be lifted.

• Only use the fastening screws included in the

scope of delivery for mounting the retaining brack-

ets of the cable hoist.

m WARNING!

Risk of injury!

During installation of the cable hoist on a pipe or

beam, the hoist may fall and cause serious injury.

• Never install the cable hoist alone, but let a second

person help you.

• Ensure secure and rm footing during installation.

• Use a working platform for installation.

The cable hoist can be mounted on round pipes,

square pipes and U-beams using the retaining brack-

ets supplied.

The size of the pipe or beam must be determined

taking into account the weight to be lifted and the po-

sition of the cable hoist.

If you have no experience with this, contact a spe-

cialist who will help you install the cable hoist.

• Place the retaining brackets (12) over the pipe or

bracket.

• Tighten the retaining brackets with the washers (9),

the spring washers (10) and the fastening screws

(11) to the cable hoist (see Fig. 3).

• Tighten the screws with a spanner.

9. Operation

Firstly, remove the adhesive tape on the cable

drum

• Before each use of the cable hoist, check that the

emergency stop switch (5) is locked.

• If the emergency stop switch is locked, turn it

clockwise to unlock it.

• To switch off the cable hoist in an emergency,

press the emergency stop switch.

With the toggle switch of the control unit, you can de-

termine the running direction of the cable drum. The

running direction is indicated by arrows next to the

toggle switch.

• To lift the load, push the toggle switch (6) to the

„Lift“ position in the upward direction of the arrow.

• To lower the load, push the toggle switch to the

„Lower“ position in the direction of the arrow.

Using the emergency stop switch

m WARNING!

An unsecured cable hoist may cause serious injury if

it is accessed by unauthorised persons.

• Make sure that the emergency stop switch is

locked if unauthorised persons have access to the

cable hoist or if you do not use the cable hoist for

a longer period.

The emergency stop switch allows the cable hoist

to be switched off immediately in an emergency.

The emergency stop switch engages as soon as it

is pressed and switches the cable hoist off.

To ensure safe and smooth operation of the cable

hoist, the safety devices and the device components

must be checked before each use of the cable hoist.

9.1 Checking the safety switches

Checking the safety switches

The safety switches of the cable hoist ensure that the

motor of the cable hoist stops as soon as the cable

drum is fully wound or almost completely unwound.

This safety device prevents damage to the cable

hoist and possible breaking free of the load.

Checking the lower limit safety switch

Activation of the lower release bracket (20) ensures that

the motor is stopped when the steel cable is unwound

and at least two windings remain on the cable drum.

The lower release bracket triggers the safety switch

for the lower limit (25).

The downward movement of the cable hoist is

stopped to prevent complete unwinding of the cable

drum.

• Let the winch extend downwards without load until

the safety switch for the lower limit (25) is activated

and the motor stops.

The winch must still have at least two windings on the

drum (16).

The safety switch also functions when the steel cable

is not tensioned.

Checking the upper limit safety switch

Activation of the upper release bracket (22) ensures

that the motor is stopped when the cable drum is fully

wound up. When the switch-off weight reaches the

upper release bracket, it triggers the safety switch for

the upper limit (26). The upward movement of the ca-

ble hoist is stopped to prevent the motor from being

blocked and overheating.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HRS800 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HRS800 Manual

Product: