Manual Scheppach HRS800 (page 24 of 108) (English, German, French, Italian)

781640

Zoom out

Zoom in

1/108

24 GB

15. Troubleshooting

Fault Cause Corrective action

Load cannot be raised Load too heavy

Brake system defective

Switch to double load

Customer service / service centre

Motor does not re-

spond

Fuse defective

Push-button defective

Replace fuse

Customer service / service centre

Please note that the following parts of this product are

subject to normal or natural wear and that the follow-

ing parts are therefore also required for use as con-

sumables.

Wear parts*: Steel cable, hook, pulley, additional

hook

* Not necessarily included in the scope of delivery!

12. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C.

Cover the electrical tool in order to protect it from

dust and moisture.

Store the operating manual with the electrical tool.

13. Electrical Connection

The installed electric motor is connected and is ready

to work.

The connection complies with the relevant VDE and

DIN regulations.

The customer-side mains supply and the used exten-

sion line must meet these regulations.

Defective Electric Connection Lines

Often, insulation damages occur on electrical con-

nection lines.

Causes are:

• Drag marks if connection lines are led through win-

dow or door clearances.

• Kinks due to improper attachment or routing of the

connection line.

• Cuts caused by running over the connection line.

• Insulation damages caused by pulling the connec-

tion line out of the wall socket.

• Fissures caused by the ageing of the insulation.

Such defective electric connection lines must not be

used and are hazardous due to the insulation dam-

ages.

Regularly check the electrical connection lines for

damages. Please make sure that the connection

lines are disconnected from the mains supply during

the check.

Electrical connection lines must comply with the rel-

evant VDE and DIN regulations. Only use connection

lines labelled with H05VV-F. The labelling of the con-

nection cable with the type specication is required.

AC motor

• The mains voltage must be 220 - 240 V~

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

14. Disposal and recycling

The equipment is supplied in packaging to preven it

from being damaged in transit. The raw materials in

this packaging can be reused or recycled. The equip-

ment and its accessories are made of various types

of material, such as metal and plastic. Defective

components must be disposed of as special waste.

Ask your dealer or your local council.

Old devices must not be disposed of with house-

hold waste!

This symbol indicates that this product must

not be disposed of together with domestic

waste in compliance with the Directive

(2012/19/EU) pertaining to waste electrical and

electronic equipment (WEEE).

This product must be disposed of at a designated col-

lection point. This can occur, for example, by handing

it in at an authorised collecting point for the recycling

of waste electrical and electronic equipment. Im-

proper handling of waste equipment may have nega-

tive consequences for the environment and human

health due to potentially hazardous substances that

are often contained in electrical and electronic equip-

ment. By properly disposing of this product, you

are also contributing to the effective use of natural

resources. You can obtain information on collection

points for waste equipment from your municipal ad-

ministration, public waste disposal authority, an au-

thorised body for the disposal of waste electrical and

electronic equipment or your waste disposal com-

pany.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HRS800 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HRS800 Manual

Product: