Manual Scheppach HP2200S (page 26 of 148) (English, German, French, Italian, Polish)

781866

Zoom out

Zoom in

1/148

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58  www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

26 | GB

• Exercise extreme caution when operating on or

crossing gravel drives, walks, or roads.

• Stay alert for hidden hazards or trafc.

• Do not carry passengers. Never leave the operat-

ing position and leave the plate compactor unat-

tended when the engine is running.

• Always stop the engine when compacting is de-

layed or when walking from one location to another.

• Stay away from the edge of ditches and avoid ac-

tions that may cause the plate compactor to topple

over. Always ascend slopes carefully, in a direct

path and in reverse to prevent the plate compactor

from toppling over onto the operator.

• Always park the unit on a rm and level surface and

shut the tool off.

• To reduce exposure to vibration, limit the hours of

operation and take periodic breaks to minimize rep-

etition and rest your hand. Reduce the speed and

force in which you do the repetitive movement.

Residual risks

The machine has been built according to the state of

the art and the recognised technical safety require-

ments. However, individual residual risks can arise

during operation.

• Furthermore, despite all precautions having been

met, some non-obvious residual risks may still re-

main.

• Residual risks can be minimised if the „safety in-

structions“ and the „Proper use“ are observed

along with the whole of the operating instructions.

• Avoid accidental starting of the machine.

• Use the tool that is recommended in this manual..

In doing so, your machine provides optimal perfor-

mance.

• Hands may never enter the processing zone when

the machine is in operation.

9. Proper use

The plate compactor, for forward or reverse compac-

tion, applies energy to the loose soil or other materi-

als to increase its density and load bearing capacity,

mainly used for general road building projects, the

landscaping sector and in structural engineering.

The loose soil or particles are moved or rearranged

in a particular manner close to each other to avoid

any trapped air or voids. It increases the load bear-

ing capacity, decreases water seepage, prevents soil

settlement, reduces swelling, contraction of the soil

and prevents frost damage. It is ideal for compaction

of interlocking paving stones, trenches, landscaping

and maintenance.

• Use only attachments and accessories approved

by the manufacturer. Failure to do so can result in

personal injury.

• Maintain the machine. Check for misalignment or

binding of moving parts, breakage of parts and

any other condition that may affect the machine’s

operation. If damaged, have the machine repaired

before use. Many accidents are caused by poorly

maintained equipment.

• Keep the engine and mufer free of grass, leaves,

excessive grease or carbon build up to reduce the

chance of a re hazard.

• Never douse or squirt the unit with water or any oth-

er liquid.

• Keep handles dry, clean and free from debris.

• Clean after each use.

• Observe proper disposal laws and regulations for

gas, oil, etc. to protect the environment.

• Store idle machine out of the reach of children and

do not allow persons unfamiliar with the machine or

these instructions to operate it. Machine is danger-

ous in the hands of untrained users.

Service

• Before cleaning, repair, inspecting, or adjusting

shut off the engine and make certain all moving

parts have stopped.

• Always make sure the engine switch is in its “OFF”

position. Disconnect the spark plug wire, and keep

the wire away from the plug to prevent accidental

starting.

• Have your machine serviced by qualied repair

personnel using only identical replacement parts.

This will ensure that the safety of the machine

maintained.

8. Additional safety instructions

• To avoid injury, keep hands, ngers and feet away

from the base plate.

• Grip the handle of the plate compactor rmly with

both hands. If both hands are holding the handle

and your feet are clear of the compactor base, your

hands, ngers and feet can not be injured by the

compactor base.

• Always operate the machine from behind, never

pass or stand in front of the machine when the en-

gine is running.

• Never place tools or any other item under the plate

compactor. If the unit strikes a foreign object, stop the

engine, disconnect the spark plug, thoroughly inspect

the machine for any damage, and repair the damage

before restarting and operating the machine.

• Do not overload the machine capacity by compact-

ing too deep in a single pass or at too fast a rate.

• Never operate the unit at high transport speeds on

hard or slippery surfaces.

IM_5904612903_HP2200s_191212_new.indd 26IM_5904612903_HP2200s_191212_new.indd 26 12.12.2019 07:40:2012.12.2019 07:40:20

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HP2200S in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 12.1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HP2200S Manual

Product: