Manual Scheppach HMS850 (page 21 of 148) (English, German, Danish, French, Italian, Polish)

759249

Zoom out

Zoom in

1/148

21GB

7 Use the right tool

- Do not force small tools to do the job of a

heavy duty tool.

- Do not use tools for purposes not intended;

or example do not use circular saws to cut

tree limbs or logs.

8 Dress properly

- Do not wear loose clothing or jewellery, they

can be caught in moving parts.

- Non-skid footwear is recommended when

working outdoors.

- Wear protective hair covering to contain

long hair.

9 Use protective equipment

- Use safety glasses.

- Use face or dust mask if working operations

create dust.

10 Connect dust extraction equipment

- lf the tool is provided for the connection of

dust extraction and collecting equipment,

ensure these are connected and properly

used.

11 Do not abuse the cord

- Never yank the cord to disconnect it from

the socket. Keep the cord away from heat,

oil and sharp edges.

12 Secure work

- Where possible use clamps or a vice to hold

the work.

lt is safer than using your hand.

13 Do not overreach

- Keep proper footing and balance at all

times.

14 Maintain tools with care

- Keep cutting tools sharp and clean for better

and safer performance.

- Follow instruction for lubricating and chang-

ing accessories.

- lnspect tool cords periodically and if dam-

aged have them repaired by an authorized

service facility.

- lnspect extension cords periodically and re-

place if damaged.

- Keep handles dry, clean and free from oil

and grease.

15 Disconnect tools

- When not in use, before servicing and when

changing accessories such as blades, bits

and cutters, disconnect tools from the power

supply.

If the planer shaft blocked when working by

excessive feed force or clamping the work

piece, turn off the device and disconnect it

from the mains plug. Remove the workpiece

and make sure that the planer shaft runs

freely. Turn the power on, and run the op-

eration again with reduced feed force.

16 Remove adjusting keys and wrenches

- Form the habit of checking to see that keys

and adjusting wrenches are removed from

the tool before turning it on.

17 Avoid unintentional starting

- Ensure switch is in “off’ position when plug-

ging in.

18 Use outdoor extension leads

- When the tool is used outdoors, use only

extension cords intended for outdoor use

and so marked.

19 Stay alert

- Watch what you are doing, use common

sense and do not operate the tool when you

are tired.

20 Check damaged parts

- Before further use of tool, it should be care-

fully checked to determine that it will oper-

ate properly and perform its intended func-

tion.

- Check for alignment of moving parts, bind-

ing of moving parts, breakage of parts,

mounting and any other conditions that may

affect its operation.

- A guard or other part that is damaged

should be properly repaired or replaced by

an authorized service centre unless other-

wise indicated in this instruction manual.

- Have defective switches replaced by an au-

thorized service centre.

- Do not use the tool if the switch does not

turn it on and off.

21 WARNING!

- The use of any accessory or attachment

other than one recommended in this instruc-

tion manual may present a risk of personal

injury.

22 Have your tool repaired by a qualied person

- This electric tool complies with the relevant

safety rules. Repairs should only be carried

out by qualied persons using original spare

parts, otherwise this may result in consider-

able danger to the user.

This appliance is not intended for use by persons

(including children) with reduced physical, sensory

or mental capabilities, or lack of experience and

knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they

do not play with the appliance.

SPECIAL SAFETY INSTRUCTIONS

• Do not use blunt knives. Risk of kick-back.

• The cutter block must be fully covered.

• Use a push stick to plane any short workpieces.

• Take additional safety precautions if you are plan-

ing any narrow workpieces. It may be necessary

to use lateral pressure equipment and springload-

ed covers to ensure that you can work in safety.

• The machine is not suitable for cutting rebates.

• The anti-kick safeguard and the infeed roller must

be inspected at regular intervals.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HMS850 in the language / languages: English, German, Danish, French, Italian, Polish as an attachment in your email.

The manual is 6,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HMS850 Manual

Product: