Manual Scheppach HL810 (page 19 of 92) (English, German, French, Italian)

781857

Zoom out

Zoom in

1/92

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 19

• Operating personnel must be at least 18 years of

age. Trainees must be at least 16 years of age, but

may only operate the machine under adult super-

vision.

• Wear working gloves when working.

• 

and hands from the splitting tool.

• Use adequate supports when splitting heavy or

bulky logs.

• Before starting any conversion, setting, cleaning,

maintenance or repair work, always switch off the

machine and disconnect the plug from the power

supply.

• Connections, repairs, or servicing work on the elec-

trical equipment may only be carried out by an elec-

trician.

• All protection and safety devices must be replaced

after completing repair and maintenance proce-

dures.

• When leaving the work place, switch off the ma-

chine and disconnect the plug from the power sup-

ply.

6. Additional safety instructions

• The log splitter may only be operated by one per-

son.

• Wear protective gear like safety goggles or other

eye protection, gloves, safety shoes etc. to protect

yourself from possible injuries.

• Never split logs containing nails, wire, or other for-

eign objects.

• Already split wood and wood chips can be danger-

ous. You can stumble, slip or fall down. Keep the

working area tidy.

• While the machine is switched on, never put your

hands on moving parts of the machine.

• Only split logs with a maximum length of 55 cm.

Remaining hazards

The machine has been built using modern tech-

nology in accordance with recognized safety

rules. Some remaining hazards, however, may

still exist.

• 

hands if the wood is incorrectly guided or support-

ed.

• Thrown pieces can lead to injury if the work piece is

not correctly placed or held.

• Injury through electric current if incorrect electric

connection leads are used.

• Even when all safety measures are taken, some re-

maining hazards which are not yet evident may still

be present.

• Remaining hazards can be minimized by following

the safety instructions as well as the instructions in

the chapter Authorized use and in the entire operat-

ing manual.

• The hydraulic log splitter can only be used in a ver-

tical position. Logs may only be split along the di-



Log lengths 55 cm

Ø min. 10 cm, max. 30 cm

• Never split logs in horizontal position or against the



• Observe the safety, working, and maintenance in-

structions of the manufacturer, as well as the di-

mensions given in the chapter Technical data.

• The applicable accident prevention regulations as

well as all generally recognized safety rules must

be adhered to.

• Only persons who have been trained in the use of

the machine and have been informed of the various

dangers may work with the machine and service or

-

lease the manufacturer from any responsibility for

resulting damage.

• The machine may only be used with original acces-

sories and original tools of the manufacturer.

• Any other use exceeds authorization. The manu-

facturer is not responsible for any damages result-

ing from unauthorized use; risk is the sole responsi-

bility of the operator.

The machine may be operated only with original parts

and original accessories of the manufacturer.

The safety, work and maintenance instructions of

the manufacturer as well as the dimensions indicat-

ed in the Technical Data section must be adhered to.

Please note that our equipment has not been de-

signed for use in commercial, trade or industri-

al applications. Our warranty will be voided if the

equipment is used in commercial, trade or industrial

businesses or for equivalent purposes.

5. Safety notes

WARNING: When you use electric machines, al-

ways observe the following safety instructions in

order to reduce the risk of re, electric shock, and

injuries.

Please read all the instructions before you work

with this machine.

• Observe all safety notes and warnings attached to

the machine.

• See to it that safety instructions and warnings at-

tached to the machine are always complete and

perfectly legible.

• Protection and safety devices on the machine may

not be removed or made useless.

• Check electrical connection leads. Do not use any

faulty connection leads.

• Before putting into operation check the correct

function of the two-hand control.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL810 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HL810 Manual

Product: