Manual Scheppach HL810 (page 18 of 92) (English, German, French, Italian)

781857

Zoom out

Zoom in

1/92

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

18 | GB

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

2. Device description

1. Transport handles

2. Riving knife

3. Riving bar

4. Adjustable claws

5. Table

6. Oil dipstick

7. Wheels

8. Stroke setting bar

9. Control handle

10. Complete control arms

11. Tray table (lateral)

12. Combination switch/plug

13. Motor

14. Cover

3. Scope of delivery

A. Splitter

B. Control arms

C. Adjustable claws

D. Additional retainers

E. Wheels

F. Enclosed accessories bag (A, B, C)

G. Operating manual

H. Table including tray tables

4. Intended use

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufactur-

er will be liable for any damage or injuries of any kind

caused as a result of this.

The equipment is to be operated only with suitable

saw blades. It is prohibited to use any type of cut-

ting-off wheel.

To use the equipment properly you must also ob-

serve the safety information, the assembly instruc-

tions and the operating instructions to be found in

this manual.

All persons who use and service the equipment have

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards.

It is also imperative to observe the accident preven-

tion regulations in force in your area. The same ap-

plies for the general rules of health and safety at

work.

The manufacturer will not be liable for any changes

made to the equipment nor for any damage resulting

from such changes.

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• 

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture.

Read the instruction manual each time before op-

erating the machine and carefully follow its informa-

tion. The machine can only be operated by persons

who were instructed concerning the operation of the

machine and who are informed about the associat-

ed dangers. The minimum age requirement must be

complied with.

In addition to the safety instructions in this operating

manual and the separate regulations of your country,

the generally recognised technical rules for operat-

ing woodworking machines must also be observed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL810 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.75 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HL810 Manual

Product: