781852
21
Zoom out
Zoom in
Previous page
1/136
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 21
If possible, store the packaging until the warranty pe-
riod has expired.
Read the operating manual to make yourself familiar
with the device prior to using it.
Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
Specify our part numbers as well as the type and year
of construction of the device in your orders.
m ATTENTION
The device and packaging materials are not toys!
Children must not be allowed to play with plas-
tic bags, lm and small parts! There is a risk of
swallowing and su󰀨ocation!
9. Attachment / Before starting the
equipment
9.1 Fitting the wheels (7) (enclosed accessories
bag A)



Fully tighten previously loosened screw.

Secure the wheels on the axle with a split pin

Repeat this process on the other side.
9.2 Fitting the table (5)


         
tighten the star grip screws previously loosened

9.3 Fitting the complete control arms (10)
(enclosed accessories bag B)
The control handles on the arms point outwards!
Insert the hexagon screw and washer through the

Guide control arm (A) into the rocker switch (B)

Place the washer (7a) between the control arm and

From below, now tighten the hexagon screw with
washer and a self-locking nut
Attention: Tighten the self-locking nut only
󰀩       
moved to the left and right.
Now fasten the other control arm on the other side
in accordance with the method described
Injury through electric current if incorrect electric
connection leads are used.
Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
Remaining hazards can be minimized by following
the safety instructions as well as the instructions in
the chapter Authorized use and in the entire oper-
ating manual.
Health hazard due to electrical power, with the use
of improper electrical connection cables.
󰀨-
chine prior to any operations.
Avoid accidental starts of the machine: Do not
press the start button while inserting the plug into
the socket.
Use the tools recommended in this manual to ob-
tain the best results from your machine.
Always keep hands away from the work area when
the machine is running.
7. Technical data
Motor V/Hz 230V / 50Hz 400V / 50Hz
Input P1 W 3000 2100
Output P2 W 2200 1500
Operating mode S6 40% S6 40%
Motor speed 1/min 2800 2800
Phase inverter - yes
Dimensions D/W/H 850 x 915 x
1495
850 x 915 x
1495
Table height 800 mm
Working height 920 mm
Log length 550 mm
Power max. tons* 7
Piston stroke 495 mm
Forward speed 4,5 cm/s
Return speed 16,5 cm/s
Oil quantity 3,5 l
Weight 98,5 kg 95,5 kg
Subject to technical changes!
8. Unpacking
Open the packaging and remove the device carefully.
Remove the packaging material as well as the pack-
aging and transport bracing (if available).
Check that the delivery is complete.
Check the device and accessory parts for transport
damage.
In case of complaints the dealer must be informed
immediately. Subsequent complaints will not be ac-
cepted.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HL730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL730 in the language / languages: English, German, French, Italian, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 5.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info