782177
27
Zoom out
Zoom in
Previous page
1/164
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 27

wood chips. Wear personal protective cloth such as

-


saw band. Wear proper gloves.
-
ing on the machine.
The use of incorrect or damaged mains cables can

Danger to health from running saw band due to
long hair and loose clothing. Wear personal protec-

work clothing.
       

still be present.
      -

Proper Use“ and in the entire operating manual.
7. Technical data
Electro motor 220 - 240 V ~, 50
Hz
Power 750W
Revolutions 1400 min-1
Saw band length 2240 mm
Saw band width 12,5 mm
Saw band width max. 15 mm
Cutting speed I 360 m/min
Cutting speed II 720 m/min
Passage height 0 - 170 mm
Passage width 305 mm
Table size 500 x 400 mm
Slewing range of the table 0° bis 4
Max. size of the
workpiece
600 x 600 x 170
mm
Overall weight 59 kg
The work piece must have a minimum height of 3 mm
and a minimum width of 10 mm.
The total noise values determined in accordance with
EN 61029.
sound pressure level LpA 77,4 dB(A)
 KpA 3 dB
sound power level LWA 90,4 dB(A)
 KWA 3 dB
Never remove loose splinters, chips or jammed
pieces of wood when the saw blade is running.
It is imperative to observe the accident prevention


-
al associations.
Important! Support long workpieces (e.g. with a
roller table) to prevent them sagging at the end of
a cut.
Make sure the blade guard (3) is in its lower posi-
tion when the saw is being transported.

the machine.

must not be used.
If the table insert is worn, replace it.
Never operate the machine if either the door pro-
    
are open.
Make sure that the choice of saw band and speed
is suitable for the material to be cut.
Do not begin cleaning the blade until it has come to
a complete standstill.
For straight cuts of small workpieces against the
longitudinal limit stop the push stick has to be used.
Wear gloves when handling the saw band and
rough materials!
The bandsaw blade guard should be in its lowest
position close to the bench during transport.
For miter cuts when the table is tilted, the parallel
stop must be positioned on the lower part of the
table.
Never use guards to lift or transport items.
Ensure that the bandsaw blade guards are used


bandsaw blade. Use a push stick for narrow cuts.
Adjustable protective devices have to be adjusted
as close as possible to the workpiece.
The push stick has to be stored on the intended de-
vice, so that it can be reached from normal working

In the normal operating position the operator is in
front of the machine.
6. Remaining hazards
The machine has been built using modern technolo-


         -
ing saw band due to improper handling of the work

due to improper handling, such as working without
the push stick.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HBS400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HBS400 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 7.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info