782177
26
Zoom out
Zoom in
Previous page
1/164
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 | GB
- Damaged protective devices and parts must be
      
    󰀨  -

- Damaged switches must be replaced at a cus-
tomer service workshop.
-        
cables.
- 
󰀨
21. Attention!
- The use of other insertion tools and other acces-

22.        
electrician
- This electric tool conforms to the applicable safe-

an electrician using original spare parts. Other-
wise accidents can occur.
Warning! This electric tool generates an electro-
magnetic eld during operation. This eld can
impair active or passive medical implants under
certain conditions. In order to prevent the risk of
serious or deadly injuries, we recommend that
persons with medical implants consult with their
physician and the manufacturer of the medical
implant prior to operating the electric tool.
Additional safety instructions
       
maintenance work on the blade!
      
use a device to stop the workpiece from twisting.
When cutting boards in upright position, use a de-
vice to prevent kick-back.
-

with woodworking dust emission values and to en-
sure reliable operation.
       
work on the machine.

        
-
ter a power failure.

that the voltage marked on the rating plate is the


󰀨
Persons working on the machine should not be dis-
tracted.
Note the direction of rotation of the motor and blade.
      
put them out of operation.
Never cut workpieces which are too small to hold

13. Avoid abnormal posture
- -

- Avoid awkward hand positions in which a sudden
slip could cause one or both hands to come into
contact with the saw blade.
14. 
- Keep cutting tools sharp and clean in order to be

- Follow the instructions for lubrication and for tool
replacement.
- Check the connection cable of the electric tool
       
specialist when damaged.
-      
them when damaged.
-          
grease.
15. Pull the plug out of the outlet
- Never remove loose splinters, chips or jammed
wood pieces from the running saw blade.
- During non-use of the electric tool or prior to
maintenance and when replacing tools such as
saw blades, bits, milling heads.
- When the saw blade is blocked due to abnormal
       󰀨

work piece and ensure that the saw blade runs
free. Turn the machine on and start new cutting
operation with reduced feed force.
16. 
- -
justing tools are removed.
17. Avoid inadvertent starting
- 󰀨
plugging the plug into an outlet.
18. Use extension cables for outdoors
-      
extension cables for use outdoors.
- 
19. Remain attentive
- -
sible when working. Do not use the electric tool

20. Check the electric tool for potential damage
- Protective devices and other parts must be care-

and function as intended prior to continued use
of the electric tool.
- Check whether the moving parts function fault-
-
       

operation of the electric tool.
- 
the open position.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HBS400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HBS400 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 7.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info