781470
28
Zoom out
Zoom in
Previous page
1/176
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
28 | GB
When processing wood, materials similar to
wood, and plastics. Operation in enclosed
-

11 
which it is not meant to be
Do not use the cable to connect the plug. From
the wall socket. Protect the Protect cables from
heat, oil and sharp edges.
12 Secure the workpiece
Use the clamping devices or a vice to hold the
workpiece in place. In this manner, it is held

      
workpieces (table, trestle, etc.) in order to pre-
vent the machine from tipping over.
     
the working plate and stop in order to prevent
bouncing and twisting of the workpiece.
13 Avoid abnormal posture
   

Avoid awkward hand positions in which a sud-
den slip could cause one or both hands to come
into contact with the saw blade.
14 
Keep cutting tools sharp and clean in order to

Follow the instructions for lubrication and for
tool replacement.


specialist when damaged.

them when damaged.

grease.
15 Pull the plug out of the outlet
Never remove loose splinters, chips or jammed
wood pieces from the running saw blade.
During non-use of the electric tool or prior to
maintenance and when replacing tools such as
saw blades, bits, milling heads.
When the saw blade is blocked due to abnormal
󰀨

the work piece and ensure that the saw blade
runs free. Turn the machine on and start new
cutting operation with reduced feed force.
16 

adjusting tools are removed.
17 Avoid inadvertent starting
󰀨
plugging the plug into an outlet.
18 Use extension cables for outdoors

extension cables for use outdoors.

19 Remain attentive

sensible when working. Do not use the electric

20 
Protective devices and other parts must be

free and function as intended prior to continued
use of the electric tool.
-
-


free operation of the electric tool.
Damaged protective devices and parts must be

󰀨-

Damaged switches must be replaced at a cus-
tomer service workshop.

cables.

󰀨
21 Attention!
The use of other insertion tools and other ac-

22        
electrician
This electric tool conforms to the applicable
 -

parts. Otherwise accidents can occur.
Warning! This electric tool generates an electro-

active or passive medical implants under certain
conditions. In order to prevent the risk of serious or
      

manufacturer of the medical implant prior to operat-
ing the electric tool.
Additional safety instructions

maintenance work on the blade!
 
use a device to stop the workpiece from twisting.
When cutting boards in upright position, use a de-
vice to prevent kick-back.
-
-

ensure reliable operation.

work on the machine.

28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HBS261 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HBS261 in the language / languages: English, German, Dutch, French, Italian, Polish as an attachment in your email.

The manual is 9.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info