Manual Scheppach FS850 (page 23 of 92) (English, German, French, Polish)

781905

Zoom out

Zoom in

1/92

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 23

9. Proper use

The machine corresponds to the valid EU Ma-

chine Directive

• Before starting work, all the protection- and safety

devices must be installed on the machine.

• The machine is designed for operation by one per-

son. The operator will be responsible for the pres-

ence of third persons in the work area.

• Observe all safety- and danger instructions on the

machine.

• Keep all safety and danger instructions near the

machine in complete and readable form.

• The machine is designed exclusively for cutting

small and medium-sized tiles (glazed, ceramic or

similar tiles) with the o󰀨ered tool and accessories.

Cutting of metal and wood is not allowed.

• The dimensions of the workpieces to be machined

should not exceed or fall below the specied max-

imum and minimum dimensions.

• Please use the machine only if it is in a technically

fault-free condition. Use It properly, conscious of

the involved safety and risk factors and giving due

consideration to the operating instructions manual!

Faults, especially those that can a󰀨ect safety must

be rectied immediately!

• The safety-, workplace- and maintenance spec-

ications of the manufacturer as well as the di-

mensions specied in the technical data must be

observed.

• The applicable accident prevention measures and

the other generally recognized technical safety

rules must be observed.

• The machine must be used, serviced or repaired

only by persons who are familiar with it and who

have been briefed about its risks.

Arbitrary alterations to the machine will make the

liability of the manufacturer for damages resulting

there from null and void.

• The machine may be used only with original ac-

cessories and original tools of the manufacturer.

Residual risks

Despite proper use, certain residual risk factors

cannot be eliminated fully. The following things can

occur, depending on the design and structure of the

machine:

• Intervention in the running diamond cutting disc.

• Contact with the diamond cutting disc in exposed

area.

• Ejection of work pieces and work piece compo-

nents.

• Ejection of a faulty diamond attachment in the cut-

ting disc.

• Hearing damage due to non-use of the required

hearing protection.

• Injuries to the eyes due to non-use of eye pro-

tection

ADDITIONAL INSTRUCTIONS

FOR LEAKAGE CURRENT CIRCUIT-BREAKER.

Please observe the following important instructions

on start-up and handling.

Pay attention to the instructions even if you hand

over the product to a third party. Preserve this oper-

ating Instructions manual for subsequent reference.

SAFETY INSTRUCTIONS!

• Arbitrary alteration and/or modication of the prod-

uct is not allowed for safety- and approval reasons

(CE). Never dismantle the product.

• The product is not suitable for handling by children.

Children cannot assess the risks involved in han-

dling electrical devices. Therefore, pay special at-

tention to the presence of children.

• The structure of the product corresponds to Pro-

tection Class 1. Only a proper mains socket with an

earth wire (230V~/50Hz) of the public power sup-

ply should be used.

• In industrial equipment, the Accident Prevention

Specications of the Federation of Trade Associ-

ations for Electrical Systems and Resources must

be observed.

• In schools, training centres, hobby- and self-help

workshops, the operation of the product must be

monitored responsibly by trained sta󰀨.

• Handle the product carefully. Impacts, hits and

drops from even low heights can damage the ma-

chine.

• Never use the product if it is brought from a cold to

a hot room. Under certain circumstances, the re-

sulting condensed water can destroy the product.

• Let the product come to the room temperature, be-

fore connecting it to the mains power supply. Under

certain circumstances, this can take several hours.

• Do not hold the product with moist or wet hands.

• Ensure that the Insulation of the entire product is

neither damaged nor destroyed.

• If the product is not operated over long periods,

disconnect it from the mains power supply, pull the

plug out of the socket.

• Avoid the following environmental conditions at the

installation site or during transport.

• Wetness or very high humidity. Extreme cold. Dust

or combustible gases, vapours or solvents. Strong

vibrations.

• Strong magnetic elds as in the vicinity of ma-

chines or loudspeakers.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach FS850 in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 6.97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach FS850 Manual

Product: