Manual Scheppach FS850 (page 22 of 92) (English, German, French, Polish)

781905

Zoom out

Zoom in

1/92

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

22 | GB

22. Connect the dust extraction device Wherever

there are facilities for tting a dust extraction sys-

tem, make sure it is connected and used.

Warning! This electric tool generates an electro-

magnetic eld during operation. This eld can impair

active or passive medical implants under certain

conditions. In order to prevent the risk of serious or

deadly injuries, we recommend that persons with

medical implants consult with their physician and the

manufacturer of the medical implant prior to operat-

ing the electric tool.

Protect yourself and you environment from acci-

dents using suitable precautionary measures!

• Do not look directly into the laser beam with unpro-

tected eyes.

• Never look into the path of the beam.

• Never point the laser beam towards reecting sur-

faces and persons or animals. Even a laser beam

with a low output can cause damage to the eyes.

• Caution - methods other than those specied here

can result in dangerous radiation exposure.

• Never open the laser module. Unexpected expo-

sure to the beam can occur.

• If the machine is not used for an extended period of

time, the batteries should be removed.

• The laser may not be replaced with a di󰀨erent type

of laser.

• Repairs of the laser may only be carried out by the

laser manufacturer or an authorised representative.

8. Additional safety instructions

Please read all the instructions before using this

product!

Workplace

To rule out the risk of physical injury, machine dam-

age, re and electric shock, please ensure that your

workplace is protected

• against humidity, wetness and rain,

• It is free of Inammable gases and liquids,

• It is clean and empty,

• It is well-ventilated and illuminated.

The operators

Healthy commonsense and caution are factors that

cannot be integrated in a machine. These factors are

the responsibility of the operator. Please consider the

following:

Prevent body contact with grounded surfaces such

as pipes and radiators. Please be watchful. Do not

work at the machine if you are tired. Always wear:

• ANSI- approved dust masks.

• Safety glasses

• Hearing protection.

Do not stretch yourself over running machines.

9. Use safety glasses Also use face or dust mask if

cutting operation is dusty.

10. Don‘t abuse cord Never carry tool by cord or yank

it to disconnect it from receptacle. Keep cord from

heat, oil and sharp edges.

11. Secure work Use clamps or a vise to hold work.

It‘s safer than using your hand and it frees both

hands to operate tool.

12. Don‘t overreach Keep proper footing and balance

at all times.

13. Maintain tools with care Keep tools sharp and

clean for better and safer performance. Follow

instructions for lubricating and changing accesso-

ries. Inspect tool cords periodically and, if dam-

aged, have repaired by authorized service facility.

Inspect extension cords periodically and replace

if damaged. Keep handles dry, clean and free

from oil and grease.

14. Disconnect tools When not in use, before ser-

vicing, and when changing accessories such as

blades, bits and cutters.

15. Remove adjusting keys and wrenches Form the

habit of checking to see that keys and adjusting

wrenches are removed from tool before turning it

on.

16. Avoid unintentional starting Don‘t carry plugged-

in tool with nger on switch. Be sure switch is o󰀨

when plugging in.

17. Outdoor use extension cords When tool is used

outdoors, use only extension cords intended for

use outdoors and so marked.

18. Stay alert Watch what you are doing. Use com-

mon sense. Do not operate tool when you are

tired.

19. Check damaged parts Before further use of the

tool, a guard or other part that is damaged should

be carefully checked to determine that it will op-

erate properly and perform its intended function.

Check for alignment of moving parts, binding of

moving parts, breakage of parts, mounting, and

any other conditions that may a󰀨ect its operation.

A guard or other part that is damaged should be

properly repaired or replaced by an authorized

service center unless otherwise indicated else-

where in this instructions manual. Have defec-

tive switches replaced by an authorized service

center. Do not use tool if switch does not turn it

on and o󰀨 .

20. Warning The use of any other accessory or at-

tachment other than recommended it this operat-

ing instruction or the catalog may present a risk of

personal injury.

21. Have your tool repaired by an expert This elec-

tric appliance is in accordance with the relevant

safety rules repairing of electric appliances may

be carried out only by experts otherwise it may

cause considerable danger for the user.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach FS850 in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 6.97 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach FS850 Manual

Product: