782260
32
Zoom out
Zoom in
Previous page
1/60
Next page
27 english
Changing Saw Blades Fig. S
Important:
Use only original saw blades which are well sharpened and free
of cracks and deformities.
Important:
Disconnect power supply plug before changing the saw blade!
1 holding mandrel
2 M 20 left-handed hexagon nuts
Push panel sizing sliding table forwards; open protective
cover using both hands.
Insert the holding mandrel (1) into the saw spindle via the
bore hole on the right table half. To unscrew or tighten the
M 20 hexagon nuts (2) the saw spindle is locked using
the holding mandrel.
Check saw blade running direction.
Important: Saw runs only when protective cover is closed!
Riving Knife Fig T
Unscrew screw (3), insert and lock riving knife. The gap
between saw blade and riving knife (4) must not exceed 8
mm and should be checked each time the saw blade is
changed. The tip of the riving knife should never be set
lower than the base height of the uppermost saw tooth. A
setting of max. 2 mm below the tip of the uppermost saw
tooth is best.
The riving knife is an important safety device which guides
the workpiece and prevents the cutting joint from closing
behind the saw blade and the workpiece from being kicked
backwards. Check the riving knife thickness - refer to the
numbers imprinted on the riving knife. The riving knife
should never be thinner than the body of the saw blade or
thicker than the cutting joint width.
Important!
The suction hood must be lowered onto the workpiece during
every working cycle.
Measuring rod and sliding handle, Fig. U
• Use the measuring rod when cutting smaller pieces of
work, with a distance of less than 120 mm between saw
blade and stop rail.
• Use the sliding handle when sliding smaller, specially
formed pieces of work. The corresponding sliding wood
slats can be made by you and attached to the sliding
handle.
Fig. S
Fig. T
Fig. U
1
2
2mm
3-8mm
3-8mm
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Forsa 8.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Forsa 8.0 in the language / languages: English, German, Finnish as an attachment in your email.

The manual is 9.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info