Manual Scheppach Forsa 8.0 (page 30 of 60) (English, German, Finnish)

782260

Zoom out

Zoom in

1/60

25 english

Table extension, Fig. M

Attach the suspension bracket for the table extension to

the machine. Subsequently screw on the suspension rod

and tighten this by hand only.

4 Flange screws M8x20

Fig. N

Open the support base and put the table extension onto

the suspension rod. Turn in the handles into the suspension

proﬁle for safety. Readjust the opened support base until

the table extension is parallel to the sawing tabletop.

Fig. O

Adjust the table extension evenly with two straight wooden

slats or similar table extension to the sawing table and

tighten the suspension spindle strongly.

Your format circular saw is now mounted.

Mounting and adjusting Fig. P1 - P2 (Page 27)

Make sure your Scheppach format circular saw

is mounted on solid ground level and stable.

Balance ﬂoor unevenness.

For this purpose on the adjustment feet

• loosen the hexagon nut (1)

• carry out the height compensation

• tighten the hexagon nut (1)

We advise you to attach the machine to the ﬂoor.

Therefore boreholes are provided next to the rubber buffers.

(2)

Forsa 9:

The machine must be attached to the ﬂoor

Fig. M

Fig. P1

Fig. N

Fig. O

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Forsa 8.0 in the language / languages: English, German, Finnish as an attachment in your email.

The manual is 9.46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Forsa 8.0 Manual

Product: