Manual Scheppach EA1700H Herkules (page 20 of 76) (English, German, French, Italian, Spanish, Finnish)

781989

Zoom out

Zoom in

1/76

20 | GB

Mineral oil products degrease your skin. If your skin

comes in contact with these substances repeatedly

and for an extended period of time, it will desiccate.

Various skin deseases may result. In addition, aller-

gic reactions are known to occur.

Eyes can be irritated by contact with oil. If oil comes

into your eyes, immediately wash them with clear wa-

ter. If your eyes are still irritated, see a doctor imme-

diately!

Check fuel lines, fuel tank cap and fuel tank for leaka-

ges or tears.

Do not start the machine with such damage.

Do not refuel the machine when the motor is still hot

or running.

Never refuel the machine close to an open ame.

Period of use:

Using the earth auger can lead to poor circulation in

the ngers, hands or wrists. Symptoms such as pins

and needles, pain, stinging and changes in the skin

can occur.

If these symptoms occur, seek medical help.

Use appropriate gloves and take regular breaks.

Keep this safety information in a safe place.

6. Technical data

Dimensions without drill

w x d x h mm 540 x 310 x 370

Motor design 1 cylinder/2-stroke

Max. motor performance kW 1,3

Displacement ccm 51,7

Idle speed r.p.m. 3000

max. speed r.p.m. 9600

Nominal speed auger r.p.m. 0-310

Vibration level at handle m/s215,62

Fuel Petrol 90 octane

Tank capacity l 1

Mixing ratio of 2-stroke motor

oil/fuel 1:40

Weight kg 9,5

Subject to technical changes!

Limit the noise and vibration to a minimum!

• Only use appliances which are in perfect working

order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

7. Before operation

Assembly

For packaging reasons, your machine has not been

assembled completely.

Inserting the earth auger, Fig. 2

• Place the motor casing on a work bench. Place the

earth auger (7) on the drive shaft (6), ensuring that

both holes are aligned.

• Insert the driving pin (A).

• Secure with split pin (B) and slightly bend it.

Fuelling Fig. 1

• Open the fuel tank cap (15).

• Pour in the fuel mixture using a funnel.

• Do not ll the tank completely as fuel expands.

• Close the fuel tank cap (15) tightly and clean the

area from possibly spilled fuel mixture.

Fuel mixture

The auger‘s motor is a two-stroke motor. It is driven

by a 1:40 fuel mixture made up of two-stroke oil and

fuel. The fuel requires unleaded ordinary petrol with

a research octane count of at least 91. Lubrication of

the motor takes place by adding premium two-stroke

oil.

Do not mix the fuel mixture in the fuel tank. Use the

mixing container supplied or another appropriate

container. Only pour the fuel mixture into the fuel tank

after previously mixing and stirring it well.

• Use fresh, clean fuel. Water and contaminants in

the petrol damage the fuel system.

• Refuel in a well-ventilated area with the motor not

running. If the motor was in use directly prior to re-

fuelling, leave it to cool down rst. Never refuel the

machine in a building where the petrol fumes can

reach ames or sparks.

• Petrol is highly ammable and explosive. When

handling fuel, you may suffer burns or other severe

injuries.

• Turn off the motor and keep away from heat, sparks

and ames.

• Only ever refuel outside.

• Wipe up spilled petrol straight away.

Starter cord (Fig. 1)

Pulling the cord (9) starts the motor.

Choke lever (Fig. 3)

The choke lever (C) closes and opens the choke in the

carburettor. In the position, the air-petrol-mixture is

enriched for the motor‘s cold start. The position

is used for the operation of the motor and for a warm

start.

Idle setting screw (Fig. 3)

Using screw (D), the auger‘s idling mixture can be

adjusted. If the idling mixture is a little too high (the

boring head turn by itself in idle mode), the idling mix-

ture can be reduced by slowly turning the screw anti-

clockwise.

Warning! Other work on the carburettor must be car-

ried out by a specialist.

8. Operation

Before commissioning, it is important that you know

and follow the safety notices.

For all work on the earth auger, you must turn off the

motor, disconnect the spark plug connector and wear

safety gloves. Start the auger only after complete as-

sembly and checking it.

WARNING! Carefully read the safety notices (see

„Safety notices“ and additional notices for petrol-po-

wered machines).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach EA1700H Herkules in the language / languages: English, German, French, Italian, Spanish, Finnish as an attachment in your email.

The manual is 3.95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach EA1700H Herkules Manual

Product: