781989
18
Zoom out
Zoom in
Previous page
1/76
Next page
18 | GB
Disruptions which can affect safety in particular
must be eliminated straight away!
The manufacturer’s stipulations concerning safety,
work and maintenance as well as the measure-
ments specied in Technical Data, must be com-
plied with.
The relevant accident prevention stipulations and
other widely recognised safety rules must be ob-
served.
The machine may only be used, maintained or
repaired by people who are familiar with it and its
dangers. Unauthorised changes to the machine
negate the manufacturer’s liability for damages re-
sulting from this.
The machine may only be used for work for which
it has been built and which is described in the ope-
rating manual.
The machine may only be used with the
manufacturer’s original accessories and original
tools.
The equipment is allowed to be used only for its pre-
scribed purpose. Any other use is deemed to be a
case of misuse. The user/operator and not the manu-
facturer will be liable for any damage or injuries of any
kind resulting from such misuse.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial appli-
cations. Our warranty will be voided if the equipment
is used in commercial, trade or industrial businesses
or for equivalent purposes.
Remaining risks:
The machine has been built according to the latest
technology and recognised safety rules. However,
there is still a chance of residual risks whilst working.
Furthermore, despite all measures taken, remaining
risks can occur that are not obvious.
Remaining risks can be minimised by complying with
the „Safety notices“ and the „Intended use“ as well as
the operating instructions overall.
5. Safety information
m Caution!
Read all safety regulations and instructions. Any er-
rors made in following the safety regulations and in-
structions may result in an electric shock, re and/or
serious injury. Keep all safety regulations and instruc-
tions in a safe place for future use.
Please note
Read the manual before commissioning
Use hearing protection, safety goggles and a hard
hat
Use safety gloves
Wear safety boots
Removing or changing protective devices and gu-
ards is prohibited
Smoking is prohibited in the working environment
Do not touch rotating parts
Do not touch hot parts
Keep third parties away from the working environ-
ment
Do not use the machine in a wet environment
Risk from ejected objects
Warning: electric current
Caution: do not run the machine in a closed area;
fumes will accumulate
Petrol is ammable and explosive
Keep motor away from heat and sparks
Hazards and safety measures
Human behaviour, misbehaviour. Always concen-
trate fully when working.
Wrapping around and entangling of work clothes.
The auger drill can catch clothes, string or wire
and draw them in.
Wear tight-tting clothing and safety boots with a
non-slip sole and steel toe caps.
• Wear long hair in a hair net.
• Warning! In the event of unseen foreign objects.
Recoil by the auger drill
If the ground is stony, hard or has many roots,
strong recoil may occur at the handles.
Avoid working with this machine on ground that is
stony, hard or has many roots.
Warning! Hold on to handles tightly, wear protec-
tive clothing.
Burns
Touching the exhaust/casing can lead to burns.
Warning! Leave the power tool to cool down.
Wear work gloves.
Contact, inhalation
The fumes from the machine can damage your
health. Only ever use the machine outside
• Warning! Take a break
Electrical contact
Touching the spark plug cap can lead to an elec-
tric shock when the motor is running.
Warning! Never touch the spark plug connector or
the spark plug when the motor is running.
Hearing damage
Long-term unprotected work with the earth auger
can cause hearing damage.
• Warning! Always use hearing protection.
Fire, explosion
The machine‘s fuel mix is ammable.
Warning! Smoking and open res are prohibited
during work and refuelling.
People slipping, tripping or falling
• On unstable ground, you can be injured if you
trip.
Warning!
Be aware of obstacles in the working environ-
ment. Always ensure a safe standing position
and wear non-slip shoes.
Ejected roots, rocks or other foreign objects
During drilling, ejected rocks or pieces of wood
can injure people and animals.
Warning!
Ensure that neither people nor animals are
present in the hazardous area and that you wear
appropriate safety clothing as well as eye and
hearing protection.
Pass on the safety notices to everyone working with
the machine. Staff commissioned to work with the
machine must read the operating manual before st-
arting work and, in particular, the chapter „Safety
notices“. It is too late during work. This particularly
applies to staff only occasionally working with the
machine, such as during set-up or maintenance.
All safety and hazard notices on the machine must
be observed.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach EA1700H Herkules at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach EA1700H Herkules in the language / languages: English, German, French, Italian, Spanish, Finnish as an attachment in your email.

The manual is 3.95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info