Manual Scheppach DS930 (page 15 of 72) (English, German, Dutch, French, Italian)

781634

Zoom out

Zoom in

1/72

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

15 І 72

goggles. Wearing personal protective equipment

such as a dust mask, non-skid safety boots, a pro-

tective helmet or hearing protection according to the

type and application of the power tool reduces the

risk of injury.

c) Avoid starting the power tool unintentionally.

Make sure that the power tool is switched off

before you connect it to themains and/or insert a

battery, pick it up or carry it. lf you have your n-

ger on the switch when you carry the power tool, or

if the machine is switched on when you connect it to

the mains, this may result in accidents.

d) Remove adjustment tools or wrenches before

switching on the power tool. Tools or wrenches in

rotating machine parts may cause injury.

e) Avoid abnormal body positions. Stand securely

and keep your balance at all times. By doing so, you

can control the power tool more easily in unexpec-

ted Situations.

f) Wear suitable clothing. Do not wear loose

clothing or jewellery. Keep your hair, clothing and

gloves away from moving parts. Loose clothing, je-

wellery or long hair may be trapped in moving parts.

g) lf dust extraction tools or collection bins can

optionally be attached, you must make sure that

they are connected and correctly used. Using

dust extraction tools may reduce risks caused by

dust.

Use and treatment of the power tool

a)Do not overload the tool. Use the appropriate

power tool for your type of work. With appropria-

te power tools, you can work better and more safely

within the given power range.

b) Do not use power tools with defective switches.

Power tools which cannot be switched on or off are

dangerous and must be repaired.

c) PuII out the plug from the socket and/or remove

the battery before you make settings to the tool,

replace accessory parts or put aside the power

tool. These precautionary measures will prevent the

power tool from starting unintentionally.

d) Keep power tools which are not in use away

from children. Only persons who are famili-

ar with the power tool and who have read the

operating instructions may use the power tool.

Power tools are dangerous if used by inexperienced

persons.

e) Maintain power tools with care. Check moving

parts for proper function and smooth running,

and check whether there are parts which are bro-

ken or damaged to the extent that the functiona-

lity of the power tool is impaired. Have damaged

parts repaired before using the power tool. Many

accidents are caused by poorly-maintained power

tools.

f) Keep cutting tools sharp and clean. Carefully

maintained cutting tools with sharp edges are less

likely to jam and can be guided more easily.

g) Use power tools, accessory parts, insertion

tools, etc. in compliance with these instruc-

tions. Take into account the working conditions and

the activity which is to be carried out. Using power

tools for applications other than those intended may

cause dangerous Situations.

Service

a) Have your power tool repaired by qualied spe-

cialists only, and always use original spare parts

for repair. This is to maintain the safety of the pow-

er tool.

Keep the noise emissions and vibrations to a

minimum.

• Only use appliances which are in perfect working

order.

• Service and clean the appliance regularly.

• Adapt your working style to suit the appliance.

• Do not overload the appliance.

• Have the appliance serviced whenever necessary.

• Switch the appliance off when it is not in use.

• Wear protective gloves.

General safety notes for power tools

Warning! Read all safety notes and instructions! Non-

compliance with safety notes and instructions may re-

sult in electric shock, re and/or severe injury!

Store all safety notes and instructions for the fu-

ture.

The term „power tool“ used in the safety notes refers

to power tools connected to the mains (with a pow-

er cable) or operated with a battery (without a power

cable).

Workplace safety

a) Keep your workplace clean and wellilluminated.

Disorderliness and poorlyilluminated workplaces

may Iead to accidents.

b) Do not operate the power tool in explosive at-

mospheres with inammable liquids, gases or

dust. Power tools generate sparks which may ignite

dust or vapours.

c) Keep children and other persons away from the

power tool during operation. You may lose control

of the tool if you are distracted.

Electric safety

a) The plug of the power tool must t into the so-

cket. Do not modify the plug in any way. Do not use

adapter plugs tagether with grounded power tools.

Unmodied plugs and matehing sockets reduce the

risk of electric shock.

b) Avoid body contact with grounded surfaces such

as pipes, radiators, ovens and refrigerators. The-

re is an increased risk of electric shock if your body

is grounded.

c) Keep power tools away from rain or humidity.

Water permeation into the power tool will increase

the risk of electric shock.

d) Use the cable solely for its intended purpose.

Do not use the cable to carry or hang up the po-

wer tool or to pull out the plug from the socket.

Keep the cable away from heat, oil, sharp edges or

moving machine parts. Damaged or twisted cables

increase the risk of electric shock.

e) When working outdoors with power tools, only

use extension cords which are suited for out-

door areas. Using extension cords suited for out-

door applications reduces the risk of electric shock.

f) lf the operation of power tools in a humid envi-

ronment cannot be avoided, you must use a resi-

dual current circuit breaker. The use of a residual

current circuit breaker will reduce the risk of electric

shock.

Personal safety

a) Pay attention to what you are doing and use po-

wer tools sensibly. Do not use power tools when

you are tired or under the inuence of drugs,

alcohol or medication. A single moment of inat-

tention while using power tools may cause severe

injury.

b) Wear personal protective equipment and safety

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DS930 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 3.89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DS930 Manual

Product: