781460

Scheppach DM600VARIO Manual

21
Zoom out
Zoom in
Previous page
1/124
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 21
• Long hair and loose clothing can be hazardous
when the work piece is rotating. Wear personal
protective gear such as a hair net and tight tting
work clothes.
• Saw dust and wood chips can be hazardous. Wear
personal protective gear such as safety goggles
and a dust mask.
• The use of incorrect or damaged mains cables can
lead to injuries caused by electricity.
• Even when all safety measures are taken, some
remaining hazards which are not yet evident may
still be present.
• Remaining hazards can be minimized by following
the instructions in „Safety Precautions“, „Proper
Use“ and in the entire operating manual.
• Before carrying out any adjustment or maintenance
work, switch off the device and disconnect the
mains plug.
6. Technical data
AC motor 220 - 240 V~ 50Hz
Power 550 Watt
Operating mode S1 *
Spindel speed 800 - 3000 min-1
Max. workpiece length 600 mm
Max. workpiece diameter 25 cm
Headstock thread M 18 x 1,5
Weight 6,7 kg
Dimensions L x W x H mm 1010x154x215
* Operating mode S1, continuous operation
Noise
Total vibration values determined in accordance with
EN 61029.
Sound pressure level LpA 86,6 dB(A)
Uncertainty KpA 3 dB
Sound power level LWA 99,6 dB(A)
Uncertainty KWA 3 dB
Wear hearing protection.
The effects of noise can cause a loss of hearing. To-
tal vibration values (vector sum - three directions) de-
termined in accordance with EN 61029.
- Crystalline silica from bricks and cement or
other masonry products
- Arsenic and chromium from chemically treat-
ed lumber
• Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment ,such as those dust masks that are spe-
cially designed to lter out microscopic particles.
• People with pacemakers should consult their phy-
sician(s) before use. Electromagnetic elds inclose
proximity to heart pacemaker could cause pace-
maker interference or pacemaker failure. In addi-
tion, people with pacemakers should:
- Avoid operating alone.
• Properly maintain and inspect to avoid electrical
shock.
• The warnings, precautions, and instructions dis-
cussed in this user manual cannot cover all possi-
ble conditions and situations that may occur. It must
be understood by the operator that common sense
and caution are factors which cannot be built into
this product, but must be supplied by the operator.
Additional safety instructions for the use of face-
plates
• Ensure that the faceplate is the appropriate size to
support the workpiece.
• Ensure that the workpiece is securely fastened to
the faceplate.
• Rough cut the workpiece as close as possible to
the nal shape before mounting onto a faceplate.
• Only use scraping chisels for faceplate turning.
Cutting chisels can easily be torn out of your hands.
• Pay attention that the woodturning chisel cannot
interfere with the holding screws at the nished di-
mensions of the workpiece.
Remaining hazards
The machine has been built using modern tech-
nology in accordance with recognized safety
rules. Some remaining hazards, however, may
still exist.
• Only process selected woods without defects such
as: Branch knots, edge cracks, surface cracks.
Wood with such defects is prone to splintering and
hazardous.
• Wood which is not correctly glued can explode
when being processed due to centrifugal force.
• Trim work piece to a rectangular shape, center and
correctly secure before processing. Unbalanced
work pieces can be hazardous.
• Injuries can occur when feeding work pieces if tool
supports are not correctly adjusted or if turning
tools are blunt. Sharp turning tools which are free
of defects are necessary for professional turning.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach DM600VARIO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DM600VARIO in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 7.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info