Manual Scheppach DECO-XLS (page 29 of 112) (English, German, Dutch, French, Italian, Portuguese, Spanish)

781462

Zoom out

Zoom in

1/112

www.scheppach.com GB | 29

Length of saw blade

approx.

132 mm

Reach 406 mm

Max. cutting height

at 0°

50 mm

Max. cutting height

at 45°

22 mm

Weight 13.3 kg

*Operating mode S1:

Continuous operation at constant load

**Operating mode S6 30%:

Continuous operation with idling (cycle time 10 min-

utes). To ensure that the motor does not become ex-

cessively hot, it may only be operated for 30% of the

cycle at the specied rating and must then be allowed

to idle for 70% of the cycle.

Noise emission values

Sound

Sound values were measured in accordance with EN

61029.

Wear ear-mu󰀨s.

The impact of noise can cause damage to hearing.

Sound pressure level LpA 66,9 dB(A)

Uncertainty KpA 3 dB(A)

Sound power level LWA 79,9 dB(A)

Uncertainty KWA 3 dB(A)

The quoted values are emission values and not nec-

essarily reliable workplace values. Although there is a

correlation between emission and imission levels it is

impossible to draw any certain conclusions as to the

need for additional precautions.

Factors with a potential inuence on the actual immis-

sion level at the workplace include the duration of im-

pact, the type of room, and other sources of noise etc.,

e. g. the number of machines and other neighbouring

operations.

Reliable workplace values may also vary from coun-

try to country. With this information the user should at

least be able to make a better assessment of the dan-

gers and risks involved.

Limit the noise level to a minimum!

• Use only equipment that is in perfect condition.

• Maintain and clean the equipment regularly.

• Always t the saw blade with the teeth facing in the

direction of the sawing table.

• Always set the correct blade tension to prevent the

saw blades from jerking.

• Be especially careful when cutting material with ir-

regular cut proles.

• Exercise particular caution when cutting round ob-

jects such as rods and pipes. These can roll down

into the saw blade and cause the teeth to catch. Use

a wedge to brace such workpieces.

• The teeth can become caught in the kerf when the

workpiece is pulled back, especially if sawings have

lled in (blocked) the kerf. In this case, you should

switch the saw o󰀨, pull the power plug, clear the kerf

with a wedge, and remove the workpiece.

• Never leave the work area without having already

switched the saw o󰀨. Wait until the saw stops moving

completely.

• Do not position, join, or construct any parts on the

work table while the saw is running.

• Only switch the saw on after you have removed any

remaining material and tools from the work table.

Leave only the workpiece to be machined and any

aids (e.g. wedges) on the work table.

• Always wear safety goggles!

• Keep your ngers at a safe distance from the saw

blade.

• Carefully guide the workpiece and keep it steady at

all times.

• Never leave the work area without having already

switched the saw o󰀨.

• Do not let your familiarity with the saw allow you to

be careless. Carelessness can lead to severe inju-

ries within a fraction of a second.

• Working position is always laterally of the saw blade.

Do not lose this safety information.

6. Technical data

Mains voltage 220-240 V~/50 Hz

Power input 80 Watt (S1*)

120 Watt (S6 30%**)

Stroke rate 500-1700 min-1

Stroke 12 mm

Base area 630 x 295 mm

Tilting range of table from 0° to 45° to the left

Table size 415 x 255 mm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DECO-XLS in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DECO-XLS Manual

Product: