782185
12
Zoom out
Zoom in
Previous page
1/92
Next page
english 13
• Turnthesawtotheside
• ApplyagenerousamountofSAE20oiltotheshaftend
and bronze bearings.
• Letthelubricantoilworkinovernight.
• Repeattheprocedurethenextdayontheothersideof
the saw.
EC Declaration of Conformity
We herewith declare, scheppach Fabrikation von Holzbearbeitungs-
maschinen GmbH, Günzburger Str. 69, D-89335 Ichenhausen that the
machine described below due to its con struc tion and design and in
the version delivered by us complies with the relevant provisions of
thefollowingECDirectives.
Incaseofamodicationofthemachinethisdeclarationceasestobe
valid.
Machine description:
Scroll Saw
Machine type:
deco 401, deco 402, deco-tronic
Art.Nr.88001904,88001905,88001914,88001906
RelevantECdirectives:
EC machine directive 98/37/EG (< 28.12.2009),
EC machine directive 2006/42/EG (> 29.12.2009),
EC Low voltage directive 2006/95/EWG,
EC-EMV directive 2004/108/EWG.
NotiedbodywithinthemeaningofAnnexVII
TÜV Rheinland, Sicherheit und Umweltschutz GmbH, 51101 Köln
Place, date:
Ichenhausen, 13.07.2009
Signature:
On behalf of Wolfgang Windrich (technical director)
Troubleshooting table
Warning: In the interests of operational safety, always switch off the saw and remove the mains plug before carrying out maintenance
work.
Fault Possible causes Action
Saw blades break Tension incorrectly set Set the correct tension
Load to great Feed the workpiece more slowly
Incorrect saw blade variety Use the correct saw blades
Workpiece not fed straight Avoid exerting pressure from the
side
Motor does not function Mains Gable faulty Changefaultyparts
Motor faulty Callcustomerservice.Donot
attempt to repair the motor yourself
as this should be carried out by
trained personnel.
Vibration
NOTE:Thesawvibratesslightly
when the motor is running in
normal operation.
Saw incorrectely installed Refertotheinstructionsgiven
earlier in this manual for
information on installing the saw
Unsuitable underlay The heavier the work bench is,the
less the vibration. A bench made
from ply wood always vibrates more
than one made from solid wood.
Select the work bench best suited
to your working conditions
The work bench is not screwed
down or is on the motor
Tighten the locking lever
The motor is not secured Securely screw the motor in place
Saw blade swings out
Holders not aligned straight
Holders not aligned Losen the screws with which the
holders are fastenedto the arm.
Align the holders so that they are
perpendicular to each other and
retighten the screws.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Deco 401 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Deco 401 in the language / languages: All languages as an attachment in your email.

The manual is 2.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info