Manual Scheppach DC500 (page 23 of 76) (English, German, Danish, Swedish, Finnish)

781453

Zoom out

Zoom in

1/76

www.scheppach.com GB | 23

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the wall

outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insulation

damage.

Check the electrical connection cables for damage

regularly. Ensure that the connection cables are dis-

connected from electrical power when checking for

damage.

Electrical connection cables must comply with the ap-

plicable VDE and DIN provisions. Only use connection

cables of the same designation.

The printing of the type designation on the connection

cable is mandatory.

For single-phase AC motors, we recommend a fuse

rating of C 16A or K 16A for machines with a high start-

ing current (from 3000 watts)!

11. Cleaning

m Attention!

Disconnect the mains plug before carrying out any

cleaning work.

We recommend that you clean the device directly after

every use.

Wipe swarf and dust o󰀨 the machine from time to time

with a cloth.

Clean the device at regular intervals using a damp

cloth and a little soft soap. Do not use any cleaning

products or solvents; they could attack the plastic parts

of the device.

Make sure that no water can penetrate the device in-

terior.

12. Storage

• Store the device and its accessories in a dark, dry

and frost-free place that is inaccessible to children.

• The optimum storage temperature lies between 5

and 30 ˚C.

• Store the power tool in its original packaging.

• Cover the power tool to protect it from dust or mois-

ture.

• Now t the intermediate part (13) using a total of four

llister head screws (17) (g. 5).

• Place the housing cpl. with engine (3) on the ma-

chine stand and x it with a total of eight llister head

screws (17) (g. 6).

8.2 Fitting the dust bag (g. 7)

• Attach the dust bag (10) to the lower air outlet using

the clamp tting (11) (g. 7).

8.3 Fitting the lter bag (g. 8)

• Insert the retaining rod (1) into the housing cpl. with

engine (3) and hook in the lter bag (2) (g. 7).

8.4 Fitting the suction hose (g. 9 + 10)

• Attach the suction hose (6) to the nozzle on the

housing cpl. with engine (3) and x it with a hose

clamp (14) (g. 9).

• Attach the hose coupling (8) to the other end of the

hose (6) using a hose clamp (14) (g. 10).

9. Start up

m ATTENTION!

Always make sure the device is fully assembled

before commissioning!

9.1 Switching on/o󰀨, g. 1

• To switch on, set the ON/OFF switch (4) to position

“I”.

• To switch the device o󰀨 again, set the ON/OFF

switch (4) to position “0”.

10. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies with

the applicable VDE and DIN provisions. The cus-

tomer‘s mains connection as well as the exten-

sion cable used must also comply with these reg-

ulations.

Damaged electrical connection cable

The insulation on electrical connection cables is often

damaged.

This may have the following causes:

• Pressure points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been improp-

erly fastened or routed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DC500 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DC500 Manual

Product: