781453

Scheppach DC500 Manual

21
Zoom out
Zoom in
Previous page
1/76
Next page
www.scheppach.com GB | 21
• Check whether the moving parts function faultlessly
and do not jam or whether parts are damaged. All
parts must be correctly mounted and all conditions
must be fullled to ensure fault-free operation of the
tool.
• Damaged protective devices and parts must be
repaired properly or replaced by a recognised spe-
cialist workshop unless otherwise specied in the
usage instructions.
• Have damaged switches replaced by a customer
service workshop.
• This tool conforms to the applicable safety regula-
tions. Repairs may only be performed by an elec-
trician using original spare parts. Otherwise, acci-
dents can occur.
• If necessary, wear suitable personal protective
equipment. This could include:
- Hearing protection to avoid the risk of becoming
hearing impaired;
- Respiratory protection to avoid the risk of inhaling
harmful dust.
• The operator must be informed about the conditions
that inuence the noise generation.
• Errors in the machine must be reported to the per-
son responsible for safety as soon as they are dis-
covered.
• This device is not designed to collect dangerous
dust.
• This device is not designed to be operated by per-
sons (including children) with impaired physical,
sensory or mental capabilities, or who have insuf-
cient experience and/or insu󰀩cient knowledge
unless they are being supervised by a person who
is responsible for their safety or they are receiving
instruction about how this device is to be used. Chil-
dren should not be left unattended, to ensure they do
not play with the device.
• WARNING: Operators must be adequately instruct-
ed in the use of these machines.
• WARNING: This machine is not suitable for picking
up dust that is hazardous to health.
• WARNING: This machine is intended for dry use
only.
• WARNING: This machine is intended for indoor use
only.
• WARNING: This machine may only be stored in-
doors.
• WARNING: Do not allow the mains connection cable
to come into contact with the rotating brushes.
• If an extension cable is required, make sure that its
cross-section is su󰀩cient for the current consump-
tion of the device. Minimum cross-section 1.5 mm2.
• Only use the cable drum when unrolled.
• Check the mains connection cable. Never use any
faulty or damaged connection cables.
• Do not use the cable to pull the plug out of the outlet.
Protect the cable from heat, oil and sharp edges.
• Do not expose the machine to rain and do not use
the machine in a damp or wet environment.
• Ensure good lighting.
• Do not use in the vicinity of combustible uids or
gases.
• When working outdoors, anti-slip footwear is rec-
ommended. Tie long hair back in a hair net. Avoid
abnormal posture
• The operating person must be at least 18 years of
age; trainees must be at least 16 years, however
only under supervision.
• Keep children away from the device when connect-
ed to the mains.
• Keep the workplace free of wood debris and parts
lying around.
• Disorder in the work area can lead to accidents.
• Do not allow other persons, especially children, to
touch the tool or the mains cable. Keep such per-
sons away from the workplace.
• Personnel working on the machine must not be dis-
tracted.
• Only carry out modications, adjustment, measuring
and cleaning work when the engine is switched o󰀨.
- Pull out the mains plug -
• Before switching on, make sure that keys and adjust-
ing tools are removed.
• Switch o󰀨 the motor and pull out the mains plug
when leaving the work station.
• All protection and safety equipment must be reas-
sembled immediately after repair or maintenance
work is completed.
• The safety, operating and maintenance information
of the manufacturer, as well as the dimensions spec-
ied in the technical data, must be observed.
• The applicable accident prevention regulations and
the other generally accepted safety rules must be
observed.
• Do not use low-output machines for heavy work.
• Do not use the cable for purposes for which it is not
intended!
• Make sure that you have secure footing and always
maintain your balance.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach DC500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DC500 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info