Manual Scheppach DC500 (page 22 of 76) (English, German, Danish, Swedish, Finnish)

781453

Zoom out

Zoom in

1/76

www.scheppach.com

22 | GB

Rated input 550 W

Motor speed 2900 min-1

Technical changes reserved!

Noise and vibration

m Warning: Noise can have serious e󰀨ects on your

health. If the machine noise exceeds 85 dB (A), please

wear suitable hearing protection.

7. Unpacking

m ATTENTION!

The device and the packaging material are not

children’s toys! Do not let children play with plas-

tic bags, lms or small parts! There is a danger of

choking or su󰀨ocating!

• Open the packaging and carefully remove the de-

vice.

• Remove the packaging material, as well as the pack-

aging and transport safety devices (if present).

• Check whether the scope of delivery is complete.

• Check the device and accessory parts for transport

damage. In the event of complaints the carrier must

be informed immediately. Later claims will not be

recognised.

• If possible, keep the packaging until the expiry of the

warranty period.

• Familiarise yourself with the product by means of the

operating instructions before using for the rst time.

• With accessories as well as wearing parts and re-

placement parts use only original parts. Replace-

ment parts can be obtained from your dealer.

• When ordering please provide our article number as

well as type and year of manufacture for your equip-

ment.

8. Assembly / Before commissioning

m ATTENTION!

Always make sure the device is fully assembled

before commissioning!

8.1 Machine stand assembly (g. 3 - 6)

• Secure the two wheels using a washer (15) and a

split pin (16) each (g. 3).

• Secure the right-hand side panel (5a) and the left-

hand side panel (5b) using two llister head screws

(18) and two hexagon nuts (19) (g. 4).

m WARNING! This power tool generates an electro-

magnetic eld during operation. This eld can impair

active or passive medical implants under certain con-

ditions. In order to prevent the risk of serious or deadly

injuries, we recommend that persons with medical im-

plants consult with their physician and the manufactur-

er of the medical implant prior to operating the power

tool.

Residual risks

The machine has been built according to the state-

of-the-art and the recognised technical safety re-

quirements. However, individual residual risks can

arise during operation.

• Risk to health from wood dust or wood chippings.

Wearing personal protective equipment such as pro-

tective goggles and dust masks is mandatory.

• Dust inhalation may occur when closing and chang-

ing the dust collection bag. A failure to observe the

disposal notes in the operating instructions (e.g. re-

garding the use of dust masks P2) may result in dust

inhalation.

• Risk to health due to noise. The permissible noise

level is exceeded during operations. It is essential

that personal protective equipment, such as hearing

protection, is worn.

• Hazard due to electrical power with the use of im-

proper electrical connection cables.

• Furthermore, despite all precautions having been

met, some non-obvious residual risks may still re-

main.

• Residual risks can be minimised if the “Safety in-

structions” and the “Proper use” are observed along

with the whole of the operating instructions.

Keep these safety instructions in a safe place.

6. Technical data

Suction port, connection Ø 100 mm

Hose length 2000 mm

Air power 1150 m³/h

Pressure di󰀨erence 900 Pa

Filter surface approx. 1 m²

Container volume approx. 75 l

Weight 14 kg

Electric motor 230 V~ / 50Hz

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DC500 in the language / languages: English, German, Danish, Swedish, Finnish as an attachment in your email.

The manual is 3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DC500 Manual

Product: