781689

Scheppach CAG115-20ProS Manual

26
Zoom out
Zoom in
Previous page
1/92
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 | GB
10.1.1 Removing/inserting the battery
• To remove the battery (8) from the appliance, press
the release button on the battery and pull out the
battery.
• To insert the battery (8), place it on the guide track
and push it back into the appliance. It will audibly
snap in.
10.1.2 Used batteries
If a fully recharged battery lasts for considerably
shorter operating times, the battery is used up and
needs to be replaced. Only use an OEM battery pack
replacement available from our Customer Service
10.2 Switches (Fig. 1)
The angle grinder is equipped with a safety switch (3)
for accident prevention and an on/off switch (4).
10.2.1 Switching on
In order to turn on the machine, press the safety
switch (3) and the on/off switch (4).
ATTENTION
Wait until the machine has reached its top speed.
You can then position the angle grinder on the
workpiece and machine it.
10.2.2 Switching off
m CAUTION
Risk of injury! The wheel continues to rotate.
In order to turn off the machine, release the safety
switch (3) and the on/off switch (4).
10.3 Changing the grinding wheels (Fig. 4, 5)
Use the face spanner (5) supplied to change the
grinding wheels. The face spanner (5) is stored in the
additional handle (6). Pull the face spanner (5) out of
the additional handle (6) when you need it.
m WARNING
For safety reasons, the angle grinder must not be
operated with the face spanner (5) inserted in it.
10.3.1 Simple wheel change by spindle lock
NOTICE
Only ever press the spindle lock when the motor
and grinding spindle are at a standstill! You must
keep the spindle lock pressed while you change
the wheel!
• Press the spindle lock (2) and allow the grinding
wheel (7) to latch in place.
• Open the ange nut (b) with the face spanner (5).
• Change the grinding or cutting wheel and tighten
the ange nut with the face spanner (5).
9. Assembly
m WARNING
Always remove the battery pack before making
adjustments to the equipment.
Be sure to read the following information before you
put your battery-operated tool into operation:
9.1 Fitting the additional handle (Fig. 3)
• The angle grinder must not be used without the ad-
ditional handle (6).
• The additional handle can be secured in any of the
three positions (A, B, C):
Tool side Suitable for
Left (Pos. A) Right-handed users
Right (position B / as
shown)
Left-handed users
Top (position C) Using cutting wheels
9.2 Adjusting the guard (Fig. 4)
• Adjust the guard (1) to protect your hands so that
the material being ground is directed away from
your body.
• The position of the guard (1) can be adjusted to any
specic working conditions. Undo the clamp handle
(c) and turn the cover into the required position.
• Ensure that the guard (1) correctly covers the gear
wheel casing.
• Secure the clamp handle (c) again.
• Ensure that the guard (1) is secure.
m Take care that the safety device is secure.
m Never use the angle grinder without the guard.
9.3 Test run for new grinding wheels
• Allow the right-angle grinder to run in idle for at
least 1 minute with the grinding or cutting wheel
tted in place.
• Replace vibrating wheels immediately.
10. Installation
m IMPORTANT
You must fully assemble the appliance before
using it for the rst time!
10.1 Battery
To ensure that the Li battery pack provides long ser-
vice, you should take care to recharge it promptly.
You must recharge the battery pack when you notice
that the power of the cordless equipment drops.
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach CAG115-20ProS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CAG115-20ProS in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info