782056
33
Zoom out
Zoom in
Previous page
1/128
Next page
33
Utilization of the machine
• Fitandsecurethecuttingknives.
• Adjustthespeed,andadjusttheoutputfenceinsucha
way that the material cut is supported and a compensa-
tion for the material removed is achieved.
• Switchthemachineon.
• Makesuretheworkpieceisrmlypressedagainstthe
fence.
• Pushtheworkpiecesoftlyfromrighttoleftagainstthe
turning direction of the tool.
• Keepyourforwardingspeedconstant.Donotpushtoo
fast – it would slow down the motor too much.
• Feeding the work piece too fast will result in a poor
cutting quality. There is also the risk of damaging the
cutting knives or the motor.
• Feeding the work piece too slow will result in burnt
spots on the work piece.
• Withveryhardwoodandimportantcutsitcanbenec-
essary to work progressively in several cuts until the
desired depth is achieved.
• Thecorrectintakespeeddependsonthecuttersize,the
material type of the work piece, and the cutting depth.
It is recommended to practise first with a piece of scrap
wood in order to determine the correct intake speed and
the dimensions.
• Switchthemachineoffbypressingtheredcover.
Symbols
The model plate on your machine can include symbols.
They contain important information regarding the use of
the machine.
Wear ear protection, goggles, and breathing mask.
Observe the applicable safety standards.
Maintenance
Warning: Make always sure that the machine is switched
off and disconnected from the power supply before you
start any setting or maintenance work.
Store the machine, operating instructions and accessories
in a safe place. This way, the instructions and tools are
alwaysathand.Regularlyremovedustanddirt.Cleaning
is preferably done with compressed air or a cloth.
During cleaning, wear goggles to protect your eyes.
Attention: Do not use any aggressive cleaning agents on
the plastic parts of the table. We recommend a mild dish-
washing liquid on a damp cloth. Water must never come
into contact with the machine.
Utilisation
• Monteretresserrerlafraise.
• Ajuster la vitesse. Ajuster la butée de sortie de telle
façonqu’ellesupportelematérielcoupéetqu’elle,en
même temps, produise une compensation pour le ma-
térielôté.
• Mettreenmarchelatoupie.
• S’assurerquelapièceàtravaillerestpresséefortement
vers la butée.
• Faireglisserlapièceàtravaillerd’unemanièresouple
de droite à gauche contre la direction de rotation de
l’outil.
• Maintenirlavitessed’avanceconstante.Nepaspousser
trop vite pour ne pas freiner trop le moteur.
• Poussertropvitepourraitdonnerunemauvaisequalité
de coupe. En outre, il pourrait endommager le fer de
fraise ou le moteur.
• Poussertroplentementpourraitlaisserdes tracesde
brûlure au bois.
• Encasdeboistrèsduretdegrandescoupes,ilpeut
être nécessaire de faire plus d’une passe lors d’un tra-
vail progressif, jusqu’à la profondeur désirée est obte-
nue.
• Lavitessed’avancedépenddelatailledelafraise,du
type de matériel du bois et de la profondeur de coupe.
Il est recommandé de tester avec une pièce de déchets
pour trouver la vitesse d’avance et les dimensions cor-
rectes.
• Mettrelamachineenmarcheenappuyantlechapeau
rouge.
Symboles
La plaque signalétique de votre machine peut comprendre
des symboles. Ceux-ci contiennent des informations im-
portantes de l’utilisation du produit.
Il faut porter des protections pour les yeux et les oreilles,
et une masque contre la poussière.
Il faut aussi remplir les standards de sécurité applica-
bles.
Maintenance
Avertissement : Avant d’entreprendre des travaux de régla-
ge ou de maintenance, toujours s’assurer que la machine
est à l’arrêt et que la fiche d’alimentation est débran-
chée.
Entreposer la machine, les instructions d’utilisation et
les accessoires dans un endroit sûr. De cette manière les
instructions et les outils sont toujours à portée de main.
Régulièrementenleverla poussièreetlesimpuretés.Le
nettoyage se fait à l’air comprimé ou à l’aide d’un chif-
fon.
Lors du nettoyage, porter des lunettes de protection pour
protéger vos yeux.
Précautions à prendre: Ne pas utiliser de produit de net-
toyage sur les parties en matière plastique de la table.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach BS 52 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BS 52 Woodster in the language / languages: English, German, Danish, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 6.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info