782056
29
Zoom out
Zoom in
Previous page
1/128
Next page
29
glage de la butée, Fig. 20
• Labutéedoitêtrerégléesurlatailledelapièceàusiner
et de l’outil de fraisage.
• Desserrerlesdeuxvisdeserrage(b)surlecôtéarrière
de la butée.
Fig. 21
• Pousserlabutéeenarrièreoutirerversl’avantdansla
positionsouhaitée.Utiliserl’échelle(c)surlatablepour
déterminer la distance entre la butée et le centre de la
fraise.
Fig. 22
• Resserrerlesdeuxvisdeserrage(b)surlecôtéarrière
pour retenir la butée dans cette position.
glage de la butée pour le dressage, Fig. 23
• Lorsdudressagedubois,lematériausortantàgauche
delafraiseestplusmincequelematériausurlecôté
droit.
• Labarredubutéeàgauchedoitêtreajustéeaumatériel
plus mince, pour supporter la pièce à travailler et assu-
rer une coupe plus exacte. A cet effet, il faut relâcher la
vis de serrage, placer la butée en avant et la resserrer
fermement.
Adjust the rabbet, Fig. 20
• Therabbetistobestoppedtothesizeoftheworkpiece
and the milling tool.
• Loosenthetwoclampingscrews(B)atthebackofthe
rabbet.
Fig. 21
• Pushtherabbettotherearorforwardofthedesiredpo-
sition.Usescale(C)onthetableinordertodetermine
the distance and take note of the drill centre.
Fig. 22
• Tightenthetwoclampingscrews(B)atthebackagain
in order to hold the rabbet in this position.
Adjust the rabbet for error, Fig. 23
• Errorfromwoodisthematerialfromwoodleftfromthe
drill exiting, more thinly than the material, on the right
side.
• The fence must be adjusted to the thinner material
which supports the work piece and ensures a more ex-
act cut. To do this, release the clamping screw, push the
fence to the front, and tighten it.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach BS 52 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BS 52 Woodster in the language / languages: English, German, Danish, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 6.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info