Manual Scheppach Bestcombi 5.0 (page 29 of 48) (English, German, French)

782113

Zoom out

Zoom in

1/48

Soutenir les pièces longues, à l‘entrée et à la sortie de la machine pour

éviter un talon (Z) en bout de pièce. Un talon de 1/10ème de mm peut être

toléré. Vériﬁer les noeuds avant le début du travail pour éviter les risques

d‘éjections dangeureux.

En cas de travail de séries, passer successivement toutes les planches à la

même épaisseur, sans rien changer au réglage ; puis recommencer le cycle

jusqu‘à obtenir l‘épaisseur de bois désirée.

Lange Werkstücke am Maschineneingang und Maschinenausgang stützen,

um eine Abstufung (Z) am Ende des Werkstückes zu vermeiden. Eine Abstu-

fung von 1/10 mm liegt innerhalb des Toleranzbereiches.

Vor Beginn der Arbeit überprüfen, ob Astknorren vorhanden sind, um ge-

fährliches Absplittern zu vermeiden. Beim Bearbeiten von mehreren Werk-

stücken hintereinander sind alle Bretter mit derselben Stärke nacheinander

zu bearbeiten, ohne daß die Einstellung geändert wird. Bearbeitungszyklus

danach von vorn beginnen, bis die gewünschte Holzstärke erreicht ist.

Long workpieces should be supported both at entry into and exit from the

machine, in order to avoid heels (Z) at the end of the timber. A heel of 1/10

mm is acceptable.

Before beginning machining, check that the timber to be used is free from

knots, in order to avoid dangerous breakages. If several pieces are to be

machined consecutively, all pieces of the same thickness should be passed

through one after another without changing the setting. Perform the ma-

chining cycle from the beginning until the required thickness is obtained.

6.5 Timber feed device (52)

Engage device using lever (R).

Wood is automatically transported by two rollers (mounted on springs), one

grooved the other smoothed. They are monted on springs.

6.6 Utilisation (52-53)

Dégauchir au préalable deux faces de référence en équerre.

Engager la pièce, surface de référence dégauchie «contre» la

table de rabotage, jusqu’à ce qu’elle soit en prise avec le rouleau

entraîneur. Laisser passer la pièce sans la pousser.

Raboter la pièce jusqu’à obtenir la dimension souhaitée.

6.6 Benutzung (52-53)

Zuvor wird das Holzwerkstück breit und hochkant in den Winkel abgerichtet.

Werkstück auf den Hobeltisch legen (Abgerichtete seite auf dem Tisch lie-

gend) reinschieben bis das Werkstück von den Vorschubswalzen erfaßt wird.

Werkstück frei durchlaufen lassen ohne nach zu drücken. Vorgang wiederho-

len bis das Werkstück den gewünschten Zustand hat.

6.6 Using (52-53)

Firstly, plane two square faces for reference.

Insert the wood with the planed reference face against the thickness planer

table, until it is caught by the feed roller. Allow the workpiece to pass wit-

hout pushing. Plane the wood in order to obtain the wished dimension.

6.5 Dispositif d’entraînement du bois (52)

Embrayer à l’aide du levier (R).

Le bois est entraîné automatiquement par deux rouleaux, le rouleau d‘entrée

est cannelé, le rouleau de sortie est lisse. Ils sont montés sur ressorts.

6.5 Automatischer Holzvorschub (52)

Vorschub durch Hebel (R) einschalten.

Das Holz wird automatisch von zwei Stahlwalzen transportiert. Die Eingangs-

walze ist geriffelt, die Ausgangswalze ist glatt. Sie sind auf Federn montiert.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Bestcombi 5.0 in the language / languages: English, German, French as an attachment in your email.

The manual is 6.33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Bestcombi 5.0 Manual

Product: