781452

Scheppach ASP50-ES Manual

18
Zoom out
Zoom in
Previous page
1/88
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
18 | GB
Installing the machine head (2) and the handle (1)
(g. 7)
• Place the machine head (2) on the stainless steel
container (15). Secure the machine head (2) with
the locking hooks (5). When installing the machine
head (2), ensure that the locking hooks (5) latch into
place correctly.
• Place the handle (1) on the machine head (2) and
fasten it with two screws (28) with a screwdriver
(not included in the delivery).
Installing the drain hose (11) (g. 8, 9, 10)
• Thread the retaining clip (13) over the drain hose
(11). (Fig. 8)
• Fit the drain hose (11) to the drain hose connec-
tion (14). Position the retaining clip (13) such that it
fastens the drain hose (11) to the drain hose con-
nection (14). Tighten the retaining clip (13) with a
screwdriver (not included in the delivery). (Fig. 9)
• At the other end of the drain hose (11) there is a
stopper (7) which must be closed during suction
operation. The drain hose can also be fastened at
the drain hose holder (8). (Fig. 10)
Installing the foam lter (22) (g. 3, 11)
Never use the device without lter! Always ensure
that the lters are correctly tted!
• Installing the foam lter (22): For wet vacuuming,
slide the foam lter (22) provided over the lter bas-
ket with safety oat valve (20).
Installing the folded lter (24) (g. 3, 12)
For dry vacuuming, slide the folded lter (24) provided
over the lter basket with safety oat valve (20). The
folded lter (24) is only suitable for dry vacuuming!
Installing the paper lter bag (23) (g. 3, 13)
It is recommended to use an additional paper lter
bag (23) when vacuuming ne, dry dirt.
• Slide the paper lter bag (23) over the suction open-
ing in the stainless steel container (15). The paper
lter bag (23) is only suitable for dry vacuuming.
The paper lter bag (23) makes it easier to dispose
of the dust collected.
Installing the suction hose (21) (g. 3, 14, 15)
Connect the suction hose (21) to the corresponding
port, depending on the desired use, on the wet and
dry vacuum.
Vacuuming:
Connect the suction hose (21) to the suction hose port
(16). To do so, slide the end of the suction hose (21)
with the two nipples into the suction hose port (16)
(A). Insert the two nipples into the recesses. Once
the suction hose is fully inserted, turn it clockwise (B).
m WARNING!
This electric tool generates an electromagnetic eld
during operation. This eld can impair active or pas-
sive medical implants under certain conditions. In
order to prevent the risk of serious or deadly injuries,
we recommend that persons with medical implants
consult with their physician and the manufacturer
of the medical implant prior to operating the elec-
tric tool.
6. Technical Data
Mains voltage 220-240 V~ 50/60 Hz
Power 1400 W
Maximum device socket
power 2000 W
Total power 3400 W
Water tank capacity 50 L
Suction performance 19Kpa
Protection category IPX4
Protection class I
7. Installation
m IMPORTANT!
Prior to use, ensure that the device has been cor-
rectly and fully assembled.
Unpacking (g. 1, 2, 3)
• Release the locking hooks (5) and remove the ma-
chine head (2). The accessories are located inside
the stainless steel container (15). Only the metal
extension tube (27) is located outside the stainless
steel container (9) in the packaging. Remove all of
the accessories from the stainless steel container
(15).
Fitting the wheels with axle (9) and the castors
(12) (g. 4, 5).
• Place the wheels with axle (9) into the recesses
provided on the wheel mounting base (10). Fas-
ten the wheels with axle (9) with the screws for the
axle-mounted wheels (29) with the help of a screw-
driver (not included in the delivery).
• Press the two castors (12) into the holes in the
wheel mounting base (10).
Installing the push grip (4) (g. 6)
• Push the push grip (4) into the push grip mount (6)
on the stainless steel container. In doing so, ensure
that the push grip (4) latches into place.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach ASP50-ES at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach ASP50-ES in the language / languages: English, German, Dutch, French, Italian, Polish, Finnish as an attachment in your email.

The manual is 4.58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info