Manual Scheppach Air Force (page 20 of 168) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

781499

Zoom out

Zoom in

1/168

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

20 | GB

AC motor

• The mains voltage must be 220 - 240 V~

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

10. Cleaning, maintenance and storage

m Important!

Pull out the power plug before doing any cleaning and

maintenance work on the equipment. Risk of injury

from electric shock!

m Important!

Wait until the equipment has cooled down complete-

ly! Risk of burns!

m Important!

Always depressurize the equipment before carrying

out any cleaning and maintenance work! Risk of in-

jury!

Cleaning

• Keep the equipment free of dirt and dust as far as

possible. Wipe the equipment with a clean cloth or

blow it down with compressed air at low pressure.

• We recommend that you clean the equipment im-

mediately after you use it.

• Clean the equipment regularly with a damp cloth

and some soft soap. Do not use cleaning agents

or solvents; these may be aggressive to the plastic

parts in the equipment. Ensure that no water can

get into the interior of the equipment.

• You must disconnect the hose and any spraying

tools from the compressor before cleaning. Do not

clean the compressor with water, solvents or the

like.

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the

following parts are therefore also required for use

as consumables.

Wear parts*: coupling

* Not necessarily included in the scope of delivery!

To do so, please rst remove the hose with the valve

adapter (8).

Now screw the blow-out adapter (D) to the tyre ina-

tion device (G).

Using the adapter set

The adapter set enables you to use the following ad-

ditional capabilities of the tyre ination device:

• Pumping up balls with the help of the ball needle

(F).

• The valve adapter (E) enables bicycle tyres to be

inated.

• Filling pools, air mattresses or boats with the help

of the additional adapter (K).

• Filling items with threaded valves (e.g. Boats) with

the screw-in valve adapter (J).

• Deating large volume items. The deating adapter

• The two conical universal adapters (A/B) can like-

wise be used for inating air mattresses.

9. Electrical connection

The electrical motor installed is connected and

ready for operation. The connection complies

with the applicable VDE and DIN provisions.

The customer‘s mains connection as well as

the extension cable used must also comply with

these regulations.

Damaged electrical connection cable

The insulation on electrical connection cables is of-

ten damaged.

This may have the following causes:

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insula-

tion damage.

Check the electrical connection cables for damage

regularly. Make sure that the connection cable does

not hang on the power network during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking „H05VV-F“.

The printing of the type designation on the connec-

tion cable is mandatory.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Air Force in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Air Force Manual

Product: