Manual Scheppach Air Force (page 18 of 168) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish)

781499

Zoom out

Zoom in

1/168

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

18 | GB

ADDITIONAL SAFETY INSTRUCTIONS

Safety instructions for working with compressed

air and blasting guns

• The compressor pump and lines can become very

hot during operation. Touching these parts will burn

you.

• The air which is sucked in by the compressor must

be kept free of impurities that could cause res or

explosions in the compressor pump.

• When releasing the hose coupling, hold the hose

coupling piece with your hand. This way, you can

protect yourself against injury from the rebound-

ing hose.

• Wear safety goggles when working with the blow-

out pistol. Foreign bodies or blown off parts can

easily cause injuries.

• Do not blow at people with the blow-out pistol and

do not clean clothes while being worn. Risk of in-

jury!

Safety information for paint spraying

• Do not process any paints or solvents with a ash

point below 55° C. There is a risk of explosion!

• Do not heat up paints or solvents. There is a risk

of explosion!

• If hazardous liquids are processed, wear protec-

tive lter units (face guards). Also, adhere to the

safety information provided by the manufacturers

of such liquids.

• The details and designations of the Ordinance on

Hazardous Substances, which are displayed on the

outer packaging of the processed material, must

be observed.

• Additional protective measures are to be under-

taken if necessary, particularly the wearing of suit-

able clothing and masks.

• Do not smoke during the spraying process and/or

in the work area. There is a risk of explosion! Paint

vapors are easily combustible.

• Never set up or operate the equipment in the vicin-

ity of a re place, open lights or sparking machines.

• Do not store or eat food and drink in the work area.

Paint vapors are harmful to your health.

• The work area must exceed 30 m3 and sufcient

ventilation must be ensured during spraying and

drying. Do not spray against the wind. Always ad-

here to the regulations of the local police authority

when spraying combustible or hazardous materi-

als.

• Do not process media such as white spirit, butyl

alcohol and methylene chloride with the PVC pres-

sure hose. These media will destroy the pressure

hose.

16 Important!

– For your own safety you must only use the ac-

cessories and additional units listed in the oper-

ating instructions or recommended or specied

by the manufacturer. The use of mounted tools

or accessories other than those recommended

in the operating instructions or catalog may

place your personal safety at risk.

17 Noise

– Wear ear muffs when you use the compressor.

18 Replacing the power cable

– To prevent hazards, leave the replacement of

damaged power cables strictly to the manufac-

turer or a qualied electrician. There is a risk

of electric shock!

19 Inating tires

–ATTENTION! The manometer has not been of-

cially calibrated! Directly after inating tires,

check the pressure with a suitable pressure

gauge, for example at your lling station.

20 Roadworthy compressors for building site opera-

tions

– Make sure that all lines and ttings are suitable

for the maximum permissible operating pres-

sure of the compressor.

21 Place of installation

– Set up the compressor on an even surface.

22 Attention!

– This device can be used by children from 8

years of age as well as by persons with reduced

physical, sensory or mental capabilities or with

a lack of experience or knowledge, if they are

supervised or if they have been trained in the

safe use of the device and understand the re-

sultant hazards.

– Children may not play with the device.

– Cleaning and maintenance may not be carried

out by children.

23 Supply hoses at pressures above 7 bar should be

equipped with a safety cable (e.g. a wire rope).

24 Avoid over-stressing the piping system by using

exible hose connections to prevent kinking.

Warning! This electric tool generates an electro-

magnetic eld during operation. This eld can im-

pair active or passive medical implants under certain

conditions. In order to prevent the risk of serious

or deadly injuries, we recommend that persons with

medical implants consult with their physician and the

manufacturer of the medical implant prior to operating

the electric tool.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Air Force in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 10.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Air Force Manual

Product: