652761
20
Zoom out
Zoom in
Previous page
1/24
Next page
20 | EN
Note:
If the unit is in AUX mode, the sleep timer will only switch off the RW 260BT. The external device
must be switched off manually.
Dimmer
The display can be dimmed in 3 levels. To select between the settings press the SNOOZE/SLEEP but-
ton repeatedly while the unit is in standby mode or any of the operating modes.
USB Charger
This unit enables you to charge your phone or other device that can be charged via USB. Simply con-
nect your device to the USB port on the back of the unit.
Notes:
The USB port on this product is only for charging the batteries of external devices. It cannot play
audio from USB devices.
A USB device must always be connected directly to the USB port of this product. The use of a
USB extension cord is not supported by this product. The USB port of this product cannot com-
municate with a computer directly.
Radio
1. Switch the unit on as described above.
2. Select radio mode by pressing the STANDBY
/MODE button repeatedly.
3. Select a desired radio station by pressing the or button repeatedly.
4. This unit has an auto store system for quick access: While in radio mode, press and hold for 2
seconds the or button. The whole frequency range will now be scanned and up 20 radio
stations that are found are automatically stored in the memory. Once the scan is nished, you can
quickly select between the stored stations by pressing the Play/Pause button and then the
or button repeatedly.
Note:
For the best FM reception fully extend the antenna.
Radio Station Presets
Besides the auto store system as described above, you can also manually store radio statione (max.
20 in total):
1. Tune to a radio station which you would like to store.
2. Press and hold for 2 seconds the Play/Pause button. The preset no. (0 - 19) and “MEM” will
be shown in the display.
3. Select a desired preset place from 0 to 19 on which you want to store the current frequency by
pressing the or button.
4. Press the Play/Pause button again to conrm your setting.
5. Repeat steps 1 - 4 to store up to 20 frequencies.
6. To recall a stored frequency, press the Play/Pause button (“CH” will be shown in the display
together with the preset no.) and then the or button until you reach the desired preset.
Notes:
Manually storing stations on presets where other stations have previously been stored on will
overwrite these.
Vice versa the auto store system will overwrite previously manually stored stations.
If a radio station is broadcasting in stereo, “ST” will be shown in the display.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaub Lorenz RW 260BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz RW 260BT in the language / languages: English, German as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info