652761
18
Zoom out
Zoom in
Previous page
1/24
Next page
18 | EN
a suitable wall socket.
3. Make sure that the output power of the wall outlet matches the required power of the adaptor.
Note:
If not using the unit for a longer period of time, unplug the adaptor from the wall outlet and from
the unit.
Battery Backup Function
Two 1.5V “AAA” batteries (not included) can be installed as a backup option to maintain the time if
electrical power fails. In the event of a power outage, the time will not appear on the display, however,
the clock will continue to operate and the actual time will be maintained. The clock display will resume
once electrical power is restored if using the backup battery. The backup batteries should be replaced
as needed. Remove the batteries if the unit is not used or stored for long periods of time.
Basic Functions
Switching the Unit On & Off
1. Power the unit as described above.
2. The unit is now in standby mode.
3. To switch the unit on, press the STANDBY
/MODE button once. The unit will switch on to the
mode last selected.
4. To switch the unit off into standby mode, press and hold for 2 seconds the STANDBY
/MODE
button.
Mode Selection
With the unit switched on, press the STANDBY
/MODE button repeatedly to switch between
the following modes: Radio, AUX, Bluetooth
®
.
Volume Control
To increase the volume, press the Volume Up/Alarm 2 button.
To decrease the volume, press the Volume Down/Alarm 1 button.
Clock Setting
The clock can only be set while the unit is in standby mode.
1. While the unit is in standby mode, press the Play/Pause button. The time will ash.
2. Press the PREV button to set the current hour.
3. Press the NEXT button to set the current minutes.
4. Once the time is set, press the Play/Pause button again to conrm and the display will go
back to displaying the set time in standby mode; the display will now show the set time.
Alarm Setting
An alarm can only be set while the unit is in standby mode.
This unit enables you to set 2 separate alarms. You can select to wake to Bluetooth
®
, Radio or Buzzer.
1. While the unit is in standby mode, press and hold for 2 seconds the Volume Down/Alarm
1 button (or the Volume Up/Alarm 2 button). (or ) will be shown in the display with
the time ashing).
2. In either alarm setting (alarm 1 or alarm 2) press the PREV button to set the desired alarm
hour and press the NEXT button to set the desired alarm minutes.
3. Once your desired time is set, press the Play/Pause button to conrm. Now press the
Volume Down/Alarm 1 button (or the Volume Up/Alarm 2 button) repeatedly to select
the desired wake up mode (Bluetooth
®
, Radio or Buzzer). The mode will be indicated in the
top left corner of the display.
4. Once the alarm mode is set, press the Play/Pause button to set the alarm volume. Press the
Volume Down/Alarm 1 button (or the Volume Up/Alarm 2 button) repeatedly to
increase/decrease the volume level.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaub Lorenz RW 260BT at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz RW 260BT in the language / languages: English, German as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info