699394
40
Zoom out
Zoom in
Previous page
1/110
Next page
38 VERSA Plus SATEL
Using the keypad, you can arm the system without the exit delay, if the hold down
the key which ends the arming sequence ( , or ) for approx. 3
seconds.
Infinite exit delay – if the option is enabled, the partition exit delay can only be ended by
means of the 1. ENTRY/EXIT FINAL, 16. EXIT DELAY TERMINATOR or 17. SHUNT LOCK type
zones. If the exit delay countdown is not completed, the armed mode will not be activated
(only the 3. INSTANT type zones will be armed).
Entry delay – the time counted from the moment of entry into the protected area which
enables the partition to be disarmed before triggering an alarm. This parameter
applies to the 0. ENTRY/EXIT and 1. ENTRY/EXIT FINAL type zones. The delay
programmed for the partition is taken into account in case of the zones for which the
value 0 has been individually programmed. The delay is programmed in seconds. Up
to 255 seconds can be programmed. If the value 0 is programmed, the zone will act
as an instant one.
Warning time – the time of warning alarm signaling for the partial armed mode (see:
WARNING IN PARTIAL ARMING zone option). The time is programmed in seconds. Up to 255
seconds can be programmed. If the value 0 is programmed, the WARNING TIME will be 30
seconds. After expiry of the WARNING TIME, unless the partition is disarmed, the burglary
alarm will be triggered.
The WARNING TIME parameter does not apply to the time of signaling the warning alarm
which is generated when mistakes are made when entering into the protected object
(see: WARNING ALARM global option).
Verification time – programming a value different from 0 means activating the alarm
verification feature in the partition. Subject to verification are alarms from 0 to 5 type
zones. The VERIFICATION TIME runs from the moment of alarm being triggered by such a
zone. If during the VERIFICATION TIME an alarm is triggered by another zone in the partition,
programmed as 0 to 5 type, the control panel will report a verified alarm. The time is
programmed in minutes. Up to 255 minutes can be programmed.
Entry delay in Day Arm – with this option enabled, after partition is armed in day mode with
no delay, the entry delay time remains valid (there is only no exit delay time). With this
option disabled, after partition is armed with no delay, there is neither exit delay nor entry
delay time.
Entry delay in Night Arm – with this option enabled, after partition is armed in night mode
with no delay, the entry delay time remains valid (there is only no exit delay time). With this
option disabled, after partition is armed with no delay, there is neither exit delay nor entry
delay time.
Auto-arming delay – the time counted from the moment when the timer is to arm the
partition, enabling the arming to be deferred. The delay time is programmed in seconds.
Up to 255 seconds can be programmed. Programming the value 0 means that the arming
deferment will be unavailable.
Deferment time – the time by which the user can defer arming by the timer. The time is
programmed in minutes. Up to 255 minutes can be programmed. Programming the value 0
means that the arming deferment will be unavailable.
Simple deferment – if the option is enabled, the user can defer auto-arming by pressing the
key twice during the auto-arm delay time countdown.
Single deferment – if the option is enabled, the user can only use the simple deferment
once, so as to postpone the auto-arming. Subsequent arming deferments are only
possible by using the A-ARM DEFER. user function ([CODE] 6. SETTINGS 1. A-ARM
DEFER
.).
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa Plus in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa Plus

Satel Versa Plus User Manual - English - 44 pages

Satel Versa Plus Installation Guide - English - 36 pages

Satel Versa Plus Quick start guide - English - 11 pages

Satel Versa Plus Installation Guide - English - 32 pages

Satel Versa Plus Quick start guide - German - 12 pages

Satel Versa Plus Additional guide - German - 113 pages

Satel Versa Plus User Manual - German - 46 pages

Satel Versa Plus Installation Guide - German - 36 pages

Satel Versa Plus Quick start guide - Dutch - 11 pages

Satel Versa Plus User Manual - Dutch - 46 pages

Satel Versa Plus Additional guide - Dutch - 110 pages

Satel Versa Plus Additional guide - Dutch - 2 pages

Satel Versa Plus Installation Guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info