699394
36
Zoom out
Zoom in
Previous page
1/110
Next page
34 VERSA Plus SATEL
disarming by zone or by means of keyfob,
alarm clearing by zone or by means of keyfob.
Starting the arming procedure, disarming or alarm clearing by means of keypad, proximity
card arm/disarm device or timer are not signaled.
Clear messaging on alarm clearing – if the option is enabled, clearing the alarm will
automatically cancel messaging about this alarm, if the user clearing the alarm has the
TEL. MESS. CLEARING right.
Service message after tamper alarm – if the option is enabled, information on the tamper
alarm can only be cleared from the troubles memory by using the service code. In the LCD
keypad, the “System tamper, call service” message will be displayed after the tamper
alarm (unless the alarm messages are displayed). The message will no longer be
displayed after the troubles memory is reset by the service.
Warning alarm – if the option is enabled, the warning alarm feature is enabled. It purpose is
to delay the loud signaling and reporting, if any mistakes are made when entering the
protected facility. The warning alarm is not reported. It can be signaled on the keypad,
proximity card arm/disarm device or outputs with the function 2. INTERNAL SIREN. The
warning alarm is triggered by the following zone types:
– 0. ENTRY/EXIT or 1. ENTRY/EXIT FINAL – unless the system is disarmed before completion
of the ENTRY DELAY countdown,
– 2. ENTRY/EXIT ROUTE – if it is violated during the ENTRY DELAY countdown, and the
system is not disarmed before completion of the DELAY TIME countdown,
– 3. INSTANT – if it is violated during the ENTRY DELAY countdown.
The warning alarm lasts 30 seconds. Unless the alarm system is disarmed during this
time, the alarm will be triggered by the zone.
Warning alarm on internal sirens – if the option is enabled, the warning alarm will be
signaled on outputs with the 2. INTERNAL SIREN function. The option is available, if the
WARNING ALARM option is enabled.
Tamper alarm always audibleif the option is enabled, the tamper alarm will be signaled
always on outputs with the 1. EXTERNAL SIREN and 2. INTERNAL SIREN functions (if the
option is disabled, only in armed mode). Also, lack of the expander is always saved in
the event log as a tamper alarm. If the option is disabled, lack of the expander will be
saved in the event log:
as a trouble, if the partition to which the expander is assigned, is disarmed (but the
keypad will signal tamper alarm anyway),
as a tamper alarm, if the partition is armed.
Tamper alarm on internal sirens – if the option is enabled, the tamper alarm will be
signaled always on outputs with the 2. INTERNAL SIREN function (in armed mode only if the
option is disabled). Additionally, the output will always signal lack of the expander (also
when the event is logged as a trouble – see: TAMPER ALARM ALWAYS AUDIBLE option).
Block after 3 unknown codes/cards – if the option is enabled, after entering an incorrect
code / reading in an incorrect card three times, the keypad / proximity card arm/disarm
device will be blocked for 90 seconds. After this period of time has expired, each
subsequent entry of an incorrect code / read-in of an incorrect card will block the keypad /
proximity card arm/disarm device at once. The counter of incorrect codes / cards will be
reset after a correct code is used.
Service Mode from RESET pins – if the option is enabled, it is possible to start the service
mode and local programming “from pins”. You can enable/disable the option in keypad:
SERVICE MODE 0. SRVMOD CONFIG 6. SRVMOD OPT. SRVMOD VIA RESET.
Limit storing "Test transm." events – when the option is enabled, if the “Test transmission”
events directly follow one another, they are only written to the event log 3 times.
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa Plus in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa Plus

Satel Versa Plus User Manual - English - 44 pages

Satel Versa Plus Installation Guide - English - 36 pages

Satel Versa Plus Quick start guide - English - 11 pages

Satel Versa Plus Installation Guide - English - 32 pages

Satel Versa Plus Quick start guide - German - 12 pages

Satel Versa Plus Additional guide - German - 113 pages

Satel Versa Plus User Manual - German - 46 pages

Satel Versa Plus Installation Guide - German - 36 pages

Satel Versa Plus Quick start guide - Dutch - 11 pages

Satel Versa Plus User Manual - Dutch - 46 pages

Satel Versa Plus Additional guide - Dutch - 110 pages

Satel Versa Plus Additional guide - Dutch - 2 pages

Satel Versa Plus Installation Guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info