699394
35
Zoom out
Zoom in
Previous page
1/110
Next page
SATEL VERSA Plus 33
panel to dial the number when some non-standard tones occur on the telephone line after
going off hook (e.g. interrupted tone). When this option is disabled, the control panel will
start dialing the number 3 seconds after going off hook, provided that the dial tone is
present.
No answer tone test – the option applies to the analog telephone communicator. If
enabled:
voice messaging: the voice message is played back 8 (first round) or 16 (next rounds)
seconds after completion of number dialing (the control panel does not check whether
the line is off-hook),
reporting: the control panel will ignore any signals (including the busy tone) received
from the telephone exchange after dialing the telephone number, and will wait for
the handshake from the monitoring station.
Enable this option if, after dialing the number, non-standard signals are received from
the telephone exchange or in case of very poor quality connections.
Store keyfob events – if the option is enabled, using the keyfob is written into the event log.
Trouble memory until review – if the option is enabled, the trouble memory is being
signaled until it is cleared (clearing the trouble memory is possible when you quit the
7. SYSTEM STATE user function).
Grade 2 – if the option is enabled, the system operates in accordance with the EN 50131
standard requirements for Grade 2, i.e.:
the way of informing the users about the system state by means of LEDs, display and
beeps in the keypads meets the requirements of the standard (see: USER MANUAL),
the quick arming from keypad (without entering the code) is not available,
new codes in the system must be composed of at least 5 characters,
prior to arming, the control panel checks that no circumstances have occurred that
prevent arming (ref. PREVENT ARMING IF NOT READY global option),
– in case of arming by means of the LCD keypad, the control panel will check if there are
any zones bypassed in the partition – information on the bypassed zones is presented,
if the user has the INSPECTION right,
the warning alarm feature is enabled in the system (see: W
ARNING ALARM global option),
the warning alarm is signaled at the 2. I
NTERNAL SIREN function output (ref. WARNING
ALARM ON INTERNAL SIRENS
global option).
You can enable/disable the option in keypad: S
ERVICE MODE 2. HARDWARE 1. KPDS &
EXPS
. 4. OPTIONS GRADE2.
Serial data on OUT 3/4 – if the option is enabled, OUT3 and OUT4 outputs send the system
status data (zone alarms, fire alarms, troubles, armed modes, etc.) and do not execute any
other programmed functions. The outputs may be used to control the NR2-DSC radio
monitoring transmitter (NEMROD system – PC-16 OUT format), made by NOKTON.
OUT 3/4 data extended mode – if the option is enabled, the OUT3 and OUT4 outputs will
send the system status data in the form of frames (PC-16 OUT UA format). The option is
available, if the S
ERIAL DATA ON OUT 3/4 option is enabled.
Arm./Disarm./Clear. signaling from zones only – if the option is enabled, outputs with the
functions 1. EXTERNAL SIREN and 2. INTERNAL SIREN with enabled ARM/DISARM/CLEAR SIGN.
option will signal only:
starting of the arming procedure by zone or by means of keyfob,
– no possibility of arming (see: PREVENT ARMING IF NOT READY option or GRADE 2 option), if
the arming command has been sent from keyfob,
failed attempt of arming by means of keypad or keyfob (see: PREVENT ARMING IF NOT
READY
option or GRADE 2 option),
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa Plus in the language / languages: English as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa Plus

Satel Versa Plus User Manual - English - 44 pages

Satel Versa Plus Installation Guide - English - 36 pages

Satel Versa Plus Quick start guide - English - 11 pages

Satel Versa Plus Installation Guide - English - 32 pages

Satel Versa Plus Quick start guide - German - 12 pages

Satel Versa Plus Additional guide - German - 113 pages

Satel Versa Plus User Manual - German - 46 pages

Satel Versa Plus Installation Guide - German - 36 pages

Satel Versa Plus Quick start guide - Dutch - 11 pages

Satel Versa Plus User Manual - Dutch - 46 pages

Satel Versa Plus Additional guide - Dutch - 110 pages

Satel Versa Plus Additional guide - Dutch - 2 pages

Satel Versa Plus Installation Guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info