699537
28
Zoom out
Zoom in
Previous page
1/47
Next page
26 PERFECTA LTE SATEL
solution enables a magnetic contact to be connected in series with the vibration
detector.
Sensitivity [32.Sensitivity] – depending on wiring type:
NO, NC, EOL and 2EOL – the time during which the zone must be violated, so that it can
be noted by the control panel. The sensitivity is programmed in milliseconds. You can
enter values from the 20 ms to 5100 ms range.
Vibration – the pulse whose duration is equal to or longer than the defined time will cause
violation of the zone. You can enter values from the 5 ms to 160 ms range (every 3 ms).
Fig. 15. “Zones” tab.
Pulses [32.Sensitivity] – the number of pulses after which the zone will be violated. The
parameter applies to the R
OLLER
and V
IBRATION
wiring configurations. For the V
IBRATION
wiring configuration you can enter values from 0 to 7 (for the value 0, the pulses will not be
counted, the S
ENSITIVITY
parameter only being taken into account). For the R
OLLER
wiring
configuration you can enter values from 1 to 8.
Time [32.Sensitivity] – the time during which the defined number of pulses must be detected
(P
ULSES
parameter) for the zone to be violated. The parameter applies to the R
OLLER
wiring configuration. You can program:
30 s (keypad: press ) – the time counted from detecting the pulse. After the time has
elapsed, the pulse counter will be reset.
120 s (keypad: press ) – similarly as in the event of 30 s.
240 s (keypad: press ) – similarly as in the event of 30 s.
for arming / disarming (keypad: press ) – the pulses are counted when the partition is
armed or disarmed. Arming / disarming will reset the pulse counter.
Assigned to part. 1 [361.P.1 zones] – if the option is enabled, the zone is assigned to
partition 1.
Assigned to part. 2 [362.P.2 zones] – if the option is enabled, the zone is assigned to
partition 2.
Armed if one part. armed [365.Act.OnePart] – the option refers to the zones which are
assigned to both partitions. If the option is enabled, the zone is armed when one of the
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 32 LTE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 32 LTE in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 32 LTE

Satel PERFECTA 32 LTE Quick start guide - English - 10 pages

Satel PERFECTA 32 LTE User Manual - English - 30 pages

Satel PERFECTA 32 LTE Additional guide - English - 50 pages

Satel PERFECTA 32 LTE Installation Guide - English - 26 pages

Satel PERFECTA 32 LTE User Manual - German - 11 pages

Satel PERFECTA 32 LTE Additional guide - German - 50 pages

Satel PERFECTA 32 LTE Installation Guide - German - 27 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info