699075
66
Zoom out
Zoom in
Previous page
1/114
Next page
64 Programming SATEL
as the output cut-off time) and if another violation occurs after the power is turned on
again, the fire alarm will be triggered. The output can be reset by the user.
45. PARTITION BLOCK STATUS indicates a temporary blocking of the partition armed status. If
the output cut-off time is different from 0, the output will signal that the partition blocking is
ending (the output will turn on for a programmed time before the blocking ends).
46. OUTPUTS LOGICAL AND active when all the control outputs with normal polarity are
active and all the control outputs with reversed polarity are inactive (because of the POL.+
option, the output can be used for logical negation). See: Logical functions of outputs
p. 68.
47. OUTPUTS LOGICAL OR active when any control output with normal polarity is active or
any control output with reversed polarity is inactive (because of the POL.+ option, the
output can be used for logical negation). See:Logical functions of outputs” p. 68.
48...63 VOICE MESSAGE 1–16 activated by the telephone messaging function. It enables any
external device to be used for playback of notification messages. When programming the
telephone messaging, the number of message to be played back is to be programmed.
The messaging will turn on the corresponding output.
64...79 REMOTE SWITCH 1–16 intended for control using the telephone (DTMF). The control
is available to the users having a telephone code. Additionally, the outputs can be
controlled using the user OUTS CONTROL function (see: USER MANUAL).
If an output of the REMOTE SWITCH type is to be controlled from the keypad, it must be
assigned to a group of outputs (see: Output groups p. 68).
If a cut-off time has been programmed for a REMOTE SWITCH type output, the output will
operate similarly to the 24. MONO SWITCH type output.
80. NO GUARD TOUR indicates lack of guard tour.
81. AC LOSS (MAINBOARD) - LONG indicates the loss of AC power supply to the control panel
mainboard, when the trouble lasts long enough to be saved to the event log (see: AC LOSS
REPORT DELAY
parameter p. 75).
82. AC LOSS (EXPANSION MODULE) - LONG indicates the loss of AC power supply to the
modules with power supply unit, when the trouble lasts long enough to be saved to the
event log (the delay is programmed individually in each module).
83. OUTPUTS OFF the output activates when all selected outputs stop signaling.
84. ACCESS CODE ENTERINGindicates the entering the user code.
85. USE OF ACCESS CODEindicates the using a code for arming/disarming.
86. DOOR OPEN INDICATOR indicates the opening the door supervised by a module executing
the access control functions.
87. DOOR TOO LONG OPENED INDICATORindicates the long open door supervised by a module
executing the access control functions.
88. BURGLARY ALARM (NO FIRE AND TAMPER)signals burglary alarms and PANIC alarms from
keypads.
89. 50% OF LOG MEMORY FILLED informs that 50% of the event log area has been filled since
the last event log reading with the DLOADX program.
90. 90% OF LOG MEMORY FILLED informs that 90% of the event log area has been filled since
the last event log reading with the DLOADX program.
91. AUTO-ARM DELAY START signals starting the AUTO-ARMING DELAY countdown for a
programmed time period (see: p. 48).
92. AUTO-ARM DELAY STATUSindicates the AUTO-ARMING DELAY countdown (see: p. 48).
93. UNAUTHORIZED ACCESSsignals unauthorized opening of a door monitored by the module
executing access control functions.
66


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 64 in the language / languages: English as an attachment in your email.

The manual is 1,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 64

Satel Integra 64 User Manual - English - 51 pages

Satel Integra 64 Installation Guide - English - 36 pages

Satel Integra 64 Additional guide - German - 121 pages

Satel Integra 64 User Manual - German - 54 pages

Satel Integra 64 Installation Guide - German - 38 pages

Satel Integra 64 Quick start guide - German - 2 pages

Satel Integra 64 User Manual - Dutch - 52 pages

Satel Integra 64 Quick start guide - Dutch - 24 pages

Satel Integra 64 Additional guide - Dutch - 121 pages

Satel Integra 64 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info