699078
26
Zoom out
Zoom in
Previous page
1/51
Next page
24 User Manual SATEL
4. Using the and keys, find in the list the partition which is to be armed (or press 0 key
and enter the partition number).
5. Press one of the digit keys 1 to 9. The symbol in the upper right-hand corner will be
replaced by the symbol (see also Selection from the multiple-choice list p. 16).
6. Repeat the steps 4 and 5 for the next partitions which are to be armed.
7. Having selected the partitions which are to be armed, press the
key.
You can also arm the selected partitions using of the ARM SELECTED function, available upon
entering the code and confirming with the
key, but only when none of the partitions
accessible to you is armed and the keypad is signaling no alarm.
5.4.3 Arming in the selected mode
1. Enter the code and confirm with the
key.
2. Using the key, scroll through the menu until the ARMING MODE function is found.
3. Press the
key. A list of arming modes will be displayed (see: description of the ARMING
MODE
function, p. 18).
4. Using the and keys, find the arming mode which is to be activated, and then press
the
key.
5. When the ARM function is displayed, press the
key. Proceed in the same way, as for
the full arming of selected partitions (steps 4-7).
5.4.4 Quick arming
The installer can permit the arming without user authorization. The partitions indicated by the
installer will be armed.
1. Select the arming mode (press one of the keys: 0 full arming; 1 full arming +
bypasses; 2 arming without interior; 3 arming without interior and without entry delay).
2. Press the
key. The arming procedure will begin.
5.4.5 Denial of arming
The installer can program the control panel so that the arming procedure could not be
started, if:
a zone is violated in the partition,
there is a trouble in the system (including tamper),
there was a verified alarm.
The keypad will inform you about the refusal to arm by means of a message specifying the
cause for refusal.
If after a verified alarm the arming is impossible, the installer must be called. The
arming will only be possible after the installer intervention (see: description of the
SYSTEM RESET function, p. 17).
Bypassing violated zones when arming
If the arming procedure could not be started, and a message on the display informs you that
there are violated zones, you can review the list of such zones upon pressing the 2 key. To
scroll through the list, use the and keys. Pressing the 4 key will allow you to bypass the
given zone. A message on the display will prompt you to press the 1 key to confirm that the
zone is to be bypassed.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 32 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 32

Satel Integra 32 Additional guide - English - 114 pages

Satel Integra 32 Installation Guide - English - 36 pages

Satel Integra 32 Quick start guide - German - 2 pages

Satel Integra 32 User Manual - German - 54 pages

Satel Integra 32 Additional guide - German - 121 pages

Satel Integra 32 Installation Guide - German - 38 pages

Satel Integra 32 Quick start guide - Dutch - 24 pages

Satel Integra 32 User Manual - Dutch - 52 pages

Satel Integra 32 Additional guide - Dutch - 121 pages

Satel Integra 32 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info