699078
24
Zoom out
Zoom in
Previous page
1/51
Next page
22 User Manual SATEL
IP/MAC/IMEI/ID displays the information related to the ETHM-1 Plus / ETHM-1 /
INT-GSM modules installed in the system. In the case of the ETHM-1 Plus / ETHM-1
module, the information includes:
local IP address,
MAC number,
public IP address,
individual identification number assigned to the ETHM-1 Plus module by the SATEL
server [ID].
In the case of the INT-GSM module, the information includes:
IMEI number,
individual identification number assigned to the INT-GSM module by the SATEL
server [ID],
GSM signal strength for SIM1 / SIM2 cards,
operator of the network into which the SIM1 / SIM2 card is logged,
SIM1 / SIM2 card account balance (press to check the balance).
Use the and keys to scroll the information. If several modules are connected to the
control panel, use the and keys to scroll the list of modules.
If the INT-GSM module is connected to the ETHM-1 Plus module, information about
both modules is displayed, except that the IMEI number of INT-GSM module is not
shown.
Modules versions allows to check the firmware versions for devices connected to the
control panel communication buses.
Time synchronization allows to manually start synchronization of the control panel
clock and the time server. It applies to the control panel to which the ETHM-1 / ETHM-1
Plus / INT-GSM module is connected. The address of time synchronization server must
be programmed in the control panel.
The function is unavailable, if the time synchronization is running. Automatic time
synchronization takes place every day at 05:30 and after the control panel restart.
Service access available to the master user (administrator). Allows to program the time
period of installer access to the alarm system. The time is programmed in hours.
Programming the value 0 means the installer will have no access.
Open door allows to unlock the door controlled by the alarm system (modules executing
the access control functions) or activate the 101. CARD READ EXPANDER type outputs.
Outputs control allow to control the devices connected to the MONO SWITCH, BI SWITCH,
REMOTE SWITCH, SHUTTER UP and SHUTTER DOWN type outputs (see: “Outputs control
p. 36).
Service modeavailable to the installer. Initiates the service mode.
Take SM over available to the installer. If the service mode has been initiated from another
keypad, it can be taken over, i.e. the service menu can be displayed on the keypad, on
which the TAKE SM OVER function has been started.
Downloadingthe following functions are available in the submenu:
Start DWNL-RS available to the installer. Enables communication with the DLOADX
program through the RS-232 / USB port of the control panel (local programming).
Finish DWNL-RS available to the installer. Disables the local programming of control
panel.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 32 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 32

Satel Integra 32 Additional guide - English - 114 pages

Satel Integra 32 Installation Guide - English - 36 pages

Satel Integra 32 Quick start guide - German - 2 pages

Satel Integra 32 User Manual - German - 54 pages

Satel Integra 32 Additional guide - German - 121 pages

Satel Integra 32 Installation Guide - German - 38 pages

Satel Integra 32 Quick start guide - Dutch - 24 pages

Satel Integra 32 User Manual - Dutch - 52 pages

Satel Integra 32 Additional guide - Dutch - 121 pages

Satel Integra 32 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info