699078
25
Zoom out
Zoom in
Previous page
1/51
Next page
SATEL INTEGRA 23
Start DWNL-MOD. enables communication with the DLOADX program via the external
modem (analog, GSM or ISDN).
Start DWNL-TEL enables communication with the DLOADX program via the 300 bps
modem.
Start DWNL-CSD enables CSD communication with the DLOADX program through the
built-in GSM communicator. only INTEGRA 128-WRL
Start DWNL-GPRS enables GPRS communication with the DLOADX program through
the built-in GSM communicator. only INTEGRA 128-WRL
ETHM-1 DLOADX enables communication with the DLOADX program using the
ETHM-1 (firmware version 1.03 or newer) / ETHM-1 Plus module. The communication
takes place over Ethernet. If the INT-GSM module is connected to the ETHM-1 Plus
module and an attempt to establish communication via Ethernet fails, an attempt will be
made to establish communication via GPRS.
ETHM-1 GUARDX enables communication with the GUARDX program using the
ETHM-1 (firmware version 1.03 or newer) / ETHM-1 Plus module. The communication
takes place over Ethernet. If the INT-GSM module is connected to the ETHM-1 Plus
module and an attempt to establish communication via Ethernet fails, an attempt will be
made to establish communication via GPRS.
INT-GSM DLOADX enables communication with the DLOADX program using the
INT-GSM module. The communication takes place via GPRS.
INT-GSM GUARDX enables communication with the GUARDX program using the
INT-GSM module. The communication takes place via GPRS.
5.4 Arming
This section describes the operations that must be carried out by the user from the keypad in
order to initiate the arming procedure. The arming procedure is ended at the running out of
the exit delay time (if the procedure is ended successfully, the system becomes armed see
also “Failure of arming procedurep. 25). If the exit delay time is 0, the system becomes
armed instantly.
The installer can configure the alarm system so that the arming functions will not be
available after tamper. A message on the display will indicate that the user must call
for service. The arming functions will not be available until the service code is entered
and confirmed with the key.
5.4.1 Full arming without partition selection
The arming without partition selection is possible when none of the partitions to which the
user has access is armed and the keypad is not signaling any alarm.
1. Enter the code and confirm with the
key
.
2. When the ARM ALL function is displayed, press the
key. The arming procedure will be
initiated in all partitions which are accessible to the user and are operated by the keypad.
If the user can only arm one partition, the arming procedure will be initiated as soon as
the code is entered and confirmed with the key.
5.4.2 Full arming the selected partitions
1. Enter the code and confirm with the
key.
2. Using the key, scroll through the menu until you find the ARM function.
3. Press the
key. A list of partitions which can be armed will be displayed.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Integra 32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Integra 32 in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Integra 32

Satel Integra 32 Additional guide - English - 114 pages

Satel Integra 32 Installation Guide - English - 36 pages

Satel Integra 32 Quick start guide - German - 2 pages

Satel Integra 32 User Manual - German - 54 pages

Satel Integra 32 Additional guide - German - 121 pages

Satel Integra 32 Installation Guide - German - 38 pages

Satel Integra 32 Quick start guide - Dutch - 24 pages

Satel Integra 32 User Manual - Dutch - 52 pages

Satel Integra 32 Additional guide - Dutch - 121 pages

Satel Integra 32 Installation Guide - Dutch - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info