699392
21
Zoom out
Zoom in
Previous page
1/28
Next page
SATEL INT-TSH 19
displayed, or they will be covered by the icon. The DLOADX program indicates using
appropriate graphic symbols the screen corners where the icons will be displayed.
The status screen is displayed automatically after the keypad is idle for 60 seconds. This rule
does not apply if the terminal is running. In such a case, the status screen may be displayed
later or even will not be displayed at all (e.g. when the service menu is open). The status bar
at the top of the screen indicates the system status by means of icons. Additionally, the
following information can be presented on the status screen:
any text defined by the installer,
partition status by means of symbols (select individual partitions whose status will be
displayed),
– zone status by means of symbols (select individual zones whose status will be
displayed),
output status by means of symbols (select individual outputs whose status will be
displayed),
temperature (indicate the control panel zone to which the temperature detector is
assigned, and define whether the temperature is to be displayed in Celsius or
Fahrenheit degrees),
date and time (particular elements, such as day, month, year, hour, minutes and
seconds are to be configured individually),
– keypad name,
zone status by means of messages (select individual zones whose status will be
displayed, and define the content and color of messages for normal state and for
violation, because only these two states are presented in the form of message),
output status by means of messages (select individual outputs whose status will be
displayed, and define the content and color of messages for active and inactive output).
There are three font sizes available for use on the status screen. You can also define color of
the font to be used. Using the “drag and drop” method, you can easily select the place where
the given information will be presented on the display.
Change picture every – the parameter defines how quickly the pictures will change during
the slide show. The slide show can be displayed as the status screen background or the
screensaver. The photos to be displayed should be stored on a microSD memory. Their
size should not exceed 800 x 480 pixels. Only images in BMP format are supported. If the
programmed time is 0, the pictures will not change (the first picture stored on the microSD
card will be displayed all the time).
Show clock – if this option is enabled, the clock and status bar will be displayed after the
keypad is idle for 10 minutes.
Color – you can select the color of the clock.
Wallpaper – click to select another status screen wallpaper.
Save to SD card – click to save the new wallpaper on the microSD card.
7.1.6 End-of-line resistance
The resistance data are stored in the keypad. Before you start programming the
resistor values, click on the “Read” button in the “EOL resistance value” tab to read the
data from the keypad. Having programmed the resistor values, click on the “Write”
button in the “EOL resistance value” tab to write the data to the keypad. The EOL
resistors related data are not read / written when you click on the button in the
main menu of DLOADX program.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSH-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSH-BSB in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSH-BSB

Satel INT-TSH-BSB User Manual - English - 20 pages

Satel INT-TSH-BSB Quick start guide - English - 2 pages

Satel INT-TSH-BSB User Manual - English - 19 pages

Satel INT-TSH-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 20 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 28 pages

Satel INT-TSH-BSB User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info