699392
19
Zoom out
Zoom in
Previous page
1/28
Next page
SATEL INT-TSH 17
Exit delay clearing (no additional parameters to configure).
Quick arm – select the arming mode which is to be activated.
The partitions must be controlled by user code.
The zones must not have the BYPASS DISABLED option enabled.
The outputs must be the 24. MONO SWITCH, 25. BI SWITCH, 105. SHUTTER UP,
106. SHUTTER DOWN or REMOTE SWITCH type (they need not be assigned to any group
of outputs).
The keypad can be used to control the KNX system, if the INT-KNX or INT-KNX-2
module is connected to the control panel.
Defining the macro commands
1. Click on the “Read” button to read the macro command related data from the keypad.
2. Click the “Definitions” tab.
3. Click the “New macro” button. A new macro command will appear in the list.
4. Enter a name for the new macro command.
5. If the macro command name is to be displayed on the keypad, enable the SHOW NAME
option.
6. If the macro command is to be run without entering the code by the user, enter the code
with a suitable authority level.
7. If running the macro command is to be each time preceded by user authorization, enable
the AUTHORIZATION REQUIRED option.
8. If the macro command is not to be available, when any of the partitions operated by the
keypad is armed, enable the DISABLED IF ARMED option.
9. If the macro command is to be run instantly on tapping the icon of macro command group,
enable the AUTOEXECUTE option (if so, only this single macro command is to be assigned
to the group).
10. If the confirmation messages are not to be displayed after running the macro command,
enable the N
O CONFIRMATION MESSAGES option.
11. Select the icon which will be used to present the macro command on the keypad.
12. If the icon is to present the status of selected output:
enable the S
TATE FOLLOW OUTPUT option;
indicate the output number;
select the icons which will illustrate inactive and active status of the output.
13. Click on the button in the “Command” field and select from the list the function the new
macro command is to execute.
14. Program the command parameters as required.
15. Click the “Add” button. A new command will appear in the list of commands assigned to
the macro command. After clicking the command you can still make a correction of its
parameters. After making the changes, click the “Change” button.
16. Repeat the steps 13-15, if you want to add next commands.
17. Click the “Groups” tab.
18. Click the group to be edited.
19. Enter the group name, if it is to be displayed on the keypad.
20. Select the icon which will be used to present the group of macro commands on the
keypad.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSH-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSH-BSB in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSH-BSB

Satel INT-TSH-BSB User Manual - English - 20 pages

Satel INT-TSH-BSB Quick start guide - English - 2 pages

Satel INT-TSH-BSB User Manual - English - 19 pages

Satel INT-TSH-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 20 pages

Satel INT-TSH-BSB Installation Guide - Dutch - 28 pages

Satel INT-TSH-BSB User Manual - Dutch - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info