699393
21
Zoom out
Zoom in
Previous page
1/28
Next page
SATEL INT-TSG 19
zone status by means of messages (select individual zones whose status will be
displayed, and define the content and color of messages for normal state and for
violation, because only these two states are presented in the form of message),
output status by means of messages (select individual outputs whose status will be
displayed, and define the content and color of messages for active and inactive output).
There are three font sizes available for use on the status screen. You can also define color of
the font to be used. Using the “drag and drop” method, you can easily select the place where
the given information will be presented on the display.
Slide show
The keypad can display a slide show (as the status screen background and after 10 minutes
of the keypad inactivity). The photos to be displayed should be stored on a microSD memory.
Their size should not exceed 480 x 272 pixels. Only images in BMP format are supported.
The C
HANGE PICTURE EVERY
parameter defines how fast the images will be changed during
the slide show. If the time equal to 0 is programmed, no slide show will be displayed. If this is
the case, the first picture stored on the microSD card will be displayed as the status screen
wallpaper.
7.1.6 End-of-line resistance
The resistance data are stored in the keypad. Before you start programming the
resistor values, click on the “Read” button in the “EOL resistance value” tab to read the
data from the keypad. Having programmed the resistor values, click on the “Write”
button in the “EOL resistance value” tab to write the data to the keypad. The EOL
resistors related data are not read / written when you click on the button in the
main menu of D
LOAD
X program.
2EOL/NC
ZCOM
R1
R2
A
T
3EOL/NC
ZCOM
R1
R2
A
T
R3
M
Fig. 9. Numbering of EOL resistors (same for the NO detector).
T – tamper. A – alarm. M – masking.
The value of EOL resistors is programmable. Depending on the control panel to whic
h the
keypad is connected:
INTEGRA
: parameters of the EOL resistors should be defined for zones in a single keypad.
Value of the resistors R1 and R2 is to be programmed (numbering of the resistors is
shown in Fig 9). You can enter values from 500
to 15 k
. The total resistance (R1+R2)
may not exceed 15 k
. For the R2 resistor, you can program value 0. In such a case, the
value of resistors used in the Double EOL configuration must be equal to half the value
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSG-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSG-BSB in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSG-BSB

Satel INT-TSG-BSB Quick start guide - English - 2 pages

Satel INT-TSG-BSB User Manual - English - 20 pages

Satel INT-TSG-BSB User Manual - English - 18 pages

Satel INT-TSG-BSB Quick start guide - German - 2 pages

Satel INT-TSG-BSB User Manual - German - 19 pages

Satel INT-TSG-BSB Installation Guide - German - 29 pages

Satel INT-TSG-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSG-BSB User Manual - Dutch - 18 pages

Satel INT-TSG-BSB User Manual - Dutch - 20 pages

Satel INT-TSG-BSB Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info