699393
18
Zoom out
Zoom in
Previous page
1/28
Next page
16 INT-TSG SATEL
Outputs ON – select the outputs which are to be activated (double-click on the field
designated by the output number).
Outputs OFF – select the outputs which are to be deactivated (double-click on the field
designated by the output number).
Change outputs state – select the outputs whose status is to be changed (double-click
on the field designated by the output number).
KNX telegram – program the following parameters of KNX telegram for the INT-KNX
module:
INT-KNX module – INT-KNX module which is to send the telegram.
Group address – the group address which will be inserted in the telegram.
Type – the telegram type.
Value – the value that will be inserted in the telegram (parameter available for some
types of the telegram).
Priority – telegram priority (if two elements of the bus start transmitting simultaneously,
the telegram with higher priority will be sent first).
KNX telegram (v2) – program the following parameters related to setting the value of KNX
communication object:
Module INT-KNX – INT-KNX-2 module in which the value is to be set.
Makro Command – name of the V
IRTUAL
(
MACRO
) type object, defined in INT-KNX-2
module.
Data type – size and meaning of the communication object data defined in INT-KNX-2
module for selected object.
Value – value to be set (if the type of data provides for sending a sequence of
characters, you can enter up to 13 characters).
Exit delay clearing (no additional parameters to configure).
Quick arm – select the arming mode which is to be activated.
The partitions must be controlled by user code.
The zones must not have the B
YPASS DISABLED
option enabled.
The outputs must be the 24. MONO
S
WITCH
, 25. BI
S
WITCH
, 105. S
HUTTER UP
,
106. S
HUTTER DOWN
or R
EMOTE SWITCH
type (they need not be assigned to any group
of outputs).
The keypad can be used to control the KNX system, if the INT-KNX or INT-KNX-2
module is connected to the control panel.
Defining the macro commands
1. Click on the “Read” button to read the macro command related data from the keypad.
2. Click the “Definitions” tab.
3. Click the “New macro” button. A new macro command will appear in the list.
4. Enter a name for the new macro command.
5. If the macro command name is to be displayed on the keypad, enable the S
HOW NAME
option.
6. If the macro command is to be run without entering the code by the user, enter the code
with a suitable authority level.
7. If running the macro command is to be each time preceded by user authorization, enable
the A
UTHORIZATION REQUIRED
option.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSG-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSG-BSB in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSG-BSB

Satel INT-TSG-BSB Quick start guide - English - 2 pages

Satel INT-TSG-BSB User Manual - English - 20 pages

Satel INT-TSG-BSB User Manual - English - 18 pages

Satel INT-TSG-BSB Quick start guide - German - 2 pages

Satel INT-TSG-BSB User Manual - German - 19 pages

Satel INT-TSG-BSB Installation Guide - German - 29 pages

Satel INT-TSG-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSG-BSB User Manual - Dutch - 18 pages

Satel INT-TSG-BSB User Manual - Dutch - 20 pages

Satel INT-TSG-BSB Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info