699393
17
Zoom out
Zoom in
Previous page
1/28
Next page
SATEL INT-TSG 15
Authorization required – if this option is enabled, the macro command will only be run after
user authorization by using a code. The code entered in the “Code” field will be ignored.
Disabled if armed – if this option is enabled, the macro command will not be available, when
any of the partitions operated by the keypad is armed.
Autoexecute – if this option is enabled and the group contains just one macro command, the
macro command will run immediately on tapping the icon of macro command group (or the
status screen corner, if the M
ACROS AVAILABLE ON THE STATUS SCREEN
option is enabled). If
the A
UTHORIZATION REQUIRED
option is enabled, authorization with code will be necessary.
No confirmation messages – if this option is enabled, no messages will appear to inform
you about execution of a command or an error after running a macro command (the
screen from which the macro command was run will still be displayed).
Icon – the macro command icon. The list of available icons will be displayed after you click
the button. If the S
TATE FOLLOW OUTPUT
option is enabled, select 2 icons for the macro
commands. One icon will be displayed when the output is inactive, and the other – when
the output is active.
State follow output – if this option is enabled, the icon of macro command will change
depending on the status of output whose number should be selected in the field on the
right side. Select an output, the status of which depends on the actions taken by the
control panel after running the macro command. Thus it will be possible to inform the
user by means of macro command icons about, for example, the status of outputs
controlled by using macro commands or the status of partitions which are armed by
a macro command.
Show name – if this option is enabled, the macro command name will be displayed on the
keypad below the icon.
Commands list – commands assigned to the currently highlighted macro command. The
and buttons allow you to change the order of commands (moving the selected
command up and down).
Add – click to add to the list a new command, selected in the “Command” field.
Change – click to save the changes to the command parameters which were made after
adding the command to the list (otherwise, the changes made will not be saved).
Delete – click to remove the highlighted command from the list.
Command – the control panel executed function which can be assigned to the macro
command. The list of all available functions will be displayed after you click the
button.
Depending on which function you choose:
Arming – select the partitions which are to be armed (double-click on the field designated
by the partition number) and define the arming mode (next clicks on the field designated
by the partition number; the digit inside the field has the following meaning: 0 - fully
armed; 1 – fully armed+bypasses; 2 – armed without interior; 3 - armed without interior
and without entry delay).
Disarming – select the partitions which are to be disarmed (double-click on the field
designated by the partition number).
Alarm clearing – select the partitions in which alarm is to be cleared (double-click on the
field designated by the partition number).
Bypass zones – select the zones which are to be inhibited (double-click on the field
designated by the zone number).
Unbypass zones – select the zones which are to be unbypassed (double-click on the field
designated by the zone number).
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel INT-TSG-BSB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel INT-TSG-BSB in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel INT-TSG-BSB

Satel INT-TSG-BSB Quick start guide - English - 2 pages

Satel INT-TSG-BSB User Manual - English - 20 pages

Satel INT-TSG-BSB User Manual - English - 18 pages

Satel INT-TSG-BSB Quick start guide - German - 2 pages

Satel INT-TSG-BSB User Manual - German - 19 pages

Satel INT-TSG-BSB Installation Guide - German - 29 pages

Satel INT-TSG-BSB Quick start guide - Dutch - 2 pages

Satel INT-TSG-BSB User Manual - Dutch - 18 pages

Satel INT-TSG-BSB User Manual - Dutch - 20 pages

Satel INT-TSG-BSB Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info